Instructions / Assembly

7
www.homewerksww.com
ASSEMBLY INSTRUCTIONS
Wall switch
back view
Black
wire
Black
wire
Green
wire
Wall
switch
NIGHT
LIGHT
5
6
5. Secure the suspension bracket I (C) to fan
housing using screw (CC) (included).
Secure suspension brackets (D & E) with
screws (BB) (included).
6. Remove junction box cover. As shown in wiring
diagram on page 5, using quick connect ports
connect house wires to switch and fan.
Note: Do not use metal wall plate with the
switch, as it may cause interference with the
fan operation.
7. Connect a 4 in. circular duct and vent to the
outside. Secure it with duct tape or clamp.
Turn on power source.
EXISTING CONSTRUCTION – ACCESSIBLE
FROM ABOVE
BEFORE INSTALLATION
Turn off power source. Review all safety
precautions.
1. Remove existing fan.
7
1