Use and Care Manual

Customer Service Hotline 1-877-693-PURE

Page 2

Home Master® Reverse Osmosis System—Owners Manual

Home Master

RO Contents:

1 Assembled RO filter cluster

1 Storage tank

1 Tank valve

1 Drain saddle & gasket

1 Roll Teflon tape

1 Mounting clip & screw

1 Chrome long reach RO faucet (or custom choice); faucet adapter and

hardware.

1 EZ adapter—feed water adapter 3/8” mc x 3/8” fc x 3/8” tube

General System Specifications

• Feed water: PSI 40 - 100 PSI

• Feed water Temperature: 40˚ - 100˚(F)

• Max. Total Dissolved Solids (TDS): 1500 ppm

• Max. Hardness: 10 gpg

• pH limits: 4 - 10

• Turbidity: 5 NTU

Maintenance Schedule (see page 11)

Replace filters — ANNUALLY or sooner if needed

Sanitize tank & Check tank pressure (7 psi) — ANNUALLY

Inspect tubing and fittings for stress and wear — ANNUALLY

Replace Membrane — 3-5 years or sooner if needed

—> VIDEO INSTALLATION INSTRUCTIONS AVAILABLE ONLINE <—

Google Keywords: Home Master The Perfect Water FAQ Installation Videos & Instructions

System Location

The Home Master

RO may be installed under a sink, or in a basement within 10’ feet of the

RO sink faucet as long as the Home Master

RO is not subjected to freezing temperatures

(please see FAQs page for more basement location details). The Home Master

RO should

be mounted vertically where the drain line out is at the bottom. Mount the reserve tank on a

sturdy shelf, because it will weigh over thirty pounds when full.

Tools Required

Safety glasses Towels

Phillips screwdriver Scissors

Medium Crescent wrench Medium pliers

Felt tip pen or marker Unscented (regular) bleach

Variable speed corded power drill (3/8” for the sink hole, ¼” for the remainder)

¼” metal drill bit w/ cobalt tip

½” metal drill bit w/ cobalt tip (not required if sink has a pre-drilled hole)

Please register your warranty