Operation Manual

ENGLISH
15
OPERATING INSTRUCTIONS
Intended use
• This device is suitable only for simply blending liquid and solid foodstuffs. Any other use can lead to damage
to the device or to injury.
Unpacking and checking
• Carefully take the device and its accessories out of the packaging. Retain the packaging in case you would
like to store the device away or transport it at a later date. If you choose to dispose of the packaging, then
please do so according to the applicable legal regulations.
• Check the packaging contents for completeness and damages. Should the contents in the packaging not be
complete or be damaged, do not use the device. Return it to your retail outlet immediately.
Mounting the wall bracket
• The wall bracket (8) for the stick blender may only be mounted on a suitable wall by experts.
• Please ensure that there are no power or supply lines running inside the wall, before you drill the mounting
holes. In the event that there are power or supply lines in the wall, choose another location to mount the
bracket.
• Hold the wall bracket at the desired location and mark the drilling holes with a ballpoint pen. Drill 2 holes
and use a hammer to bang the rawl plugs (10) into the holes. Tighten the screws (9) in the rawl plugs.
Preparation
• Before using the device for the first time, clean all parts that will come in contact with foodstuffs. Follow the
directions in the chapter entitled CLEANING AND CARE.
• Assemble the device properly, before you connect the power plug (1) to a power socket.
• Attach the blender wand (6) to the motor unit (5) and turn it until it locks in place. The blender wand is firmly
locked, if the marking on the blender wand and the lock symbol are aligned.
Operate the stick blender
• This stick blender is suitable for the preparation of baby food, soups, sauces, milkshakes, mixed drinks and
mayonnaise.
• Use the stick blender only in a suitable bowl, measuring beaker, pot or in another suitable container.
• To avoid splashing, immerse the stick blender in the bowl with the ingredients first and then turn it on.
• Press on speed button I (3) to switch the stick blender on and to blend at a low speed. Press on speed
button II (4) for a faster blending speed.
• If you use an up and down motion while operating the stick blender, the ingredients will be processed most
effectively. Make sure that the mixture does not reach as far as the connection between the motor unit and
the blender wand.
• If the stick blender gets stuck, disconnect the power plug (1) from the power socket. Only then, remove any
lodged food particles from the blender wand.
SM5002W-IM-DE-EN-V1.indb 15 05/02/2010 10:43 AM