Operation Manual

ENGLISH
13
IMPORTANT SAFETY INSTRUCTIONS
• The protective screen will be very hot during operation. Please be sure that the power cord does not come
into contact with the protective screen.
• For additional protection we recommend the installation of a residual current device (RCD) having a rated
residual operating current not exceeding 30mA in the electrical circuit supplying the bathroom. Ask your
installer for advice.
• Do not open the casing under any circumstance. Never insert any objects into the air intake and exhaust
openings.
• Please be sure that objects like hair pins or clips do not enter into the device. This could short-circuit or
damage the device.
• Let the device cool off completely prior to removing or attaching any accessories.
• Never use sprays or water misters near the device while it is in use.
• Some components of the device may be very hot during operation. Therefore, touch the device only on the
handle.
• Never cover the air intake and exhaust openings during use.
• Ensure that hair cannot enter into the air intake and exhaust openings.
• If air intake and exhaust openings are covered during use, the integrated overheating protection will shut
the device off automatically. Disconnect the power plug and allow the device to cool off prior to restarting it.
Inspect whether the protective screen is soiled and remove any residue, e.g. hair or lint.
HT4002-IM-DE-EN-V2.indb 13 16/07/2009 11:01 AM