Item #1006 660 364 Model #YJAF-819C-NCS USE AND CARE GUIDE 10 FT X 10 FT SQUARE OFFSET UMBRELLA Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this umbrella.
Table of Contents Table of Contents........................................................ 2 Safety Information ................................................................ 2 Product Caution ... ................................................................... 2 Safety Warnings ... ................................................................... 2 Warranty ...................................................................... 2 What is Covered.......................................................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to assemble this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. BB AA EE Part AA BB CC DD EE FF Description M6x10 bolt M6x15 bolt M10x22 combination bolt M10x25 combination bolt M10 hex wrench M6 hex wrench CC DD FF Quantity 1+1 1+1 4+1 4+1 1 1 3 HOMEDEPOT.
Pre-Assembly (continued) PACKAGE CONTENTS E F K L I J D J C I G H A B Part Description Quantity A Lower bracket Upper bracket 1 1 C D Base tube 1 Lower umbrella pole 1 E F G Crank Umbrella shade Pedal Turn plate 1 1 1 I J Side base Middle base 2 2 K L Upper base cover Lower base cover 1 1 B H 1 4
Assembly 1 Pouring Sand and Water into the Bases Open the side bases (I) and the middle bases (J) in the counterclockwise direction. Pour sand and water into the side bases (I) and the middle bases (J). Close the side bases (I) and the middle bases (J) in the clockwise direction. NOTE: Place the bases in the area where the umbrella is to be used. The umbrella will be very heavy after filled with sand and water. NOTE: The bases are OK to be filled with sand and water or can be filled with just water.
Assembly (continued) 2 Attaching the Brackets Attach the upper bracket (B) onto the lower bracket (A).
Assembly (continued) 3 Attaching the Turn Plate to the Brackets and the Base Tube to the Turn Plate Attach the pedal (G) to the turn plate (H) using M6x10 bolt (AA) and the M6 hex wrench (FF). Pull out the lower umbrella pole (D) from the base tube (C). Attach the turn plate (H) to the brackets (A and B) using M10x25 combination bolts (DD) and the M10 hex wrench (EE). Attach the base tube (C) to the turn plate (H) using M10x22 combination bolts (CC) and the M10 hex wrench (EE).
Assembly (continued) 4 Attaching the Middle Bases to the Brackets Attach the middle bases (J) onto the brackets (A and B).
Assembly (continued) 5 Attaching the Side Bases to the Brackets Attach the side bases (I) to the brackets (A and B). I I 9 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Assembly (continued) the Lower Base Cover, Upper Base Cover and Lower Umbrella Pole 6 Inserting into the Base Tube Insert the lower base cover (L) into the base tube (C). Insert the upper base cover (K) into the base tube (C). Insert the lower umbrella pole (D) into the base tube (C).
Assembly (continued) 7 Inserting the Umbrella Shade into the Base Tube Insert the umbrella shade (F) into the base tube (C) using one M6x15 bolt (BB) and M6 hex wrench (FF). Fully tighten all the bolts at this step. FF BB F C 11 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Operation 1 Attaching the Crank to the Handle and opening the Umbrella Attach the crank (E) to the handle. Shake the umbrella fabric before opening the umbrella. Slowly turn the crank (E) clockwise to open the umbrella, press the button on the handle, hold the handle and push the umbrella shade to the desired position.
Operation (continued) 2 Rotating the Umbrella Hold the pedal (G) with one foot and rotate the umbrella pole. (The umbrella can rotate up to 360 degrees). 360° G 13 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Operation (continued) 3 Adjusting the Umbrella If you need to adjust the umbrella shade position, press the button on the handle and push up or push down to desired position.
Operation (continued) 4 Closing the Umbrella Slowly turn the crank (E) in a counterclockwise direction to close the umbrella. Hold the umbrella handle, and press the button on the handle, and push the umbrella shade downward. Tie the umbrella to the umbrella pole with the Velcro® belt when not in use, as shown below. 1 BUTTON 2 15 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Operation (continued) 5 Attaching and Detaching the Crank Attach the crank (E) without using the tap as shown in figure 1. To detach the crank (E), just take the crank out. Attach the crank (E) to the handle as shown in figure 2. Attach the crank (E) by aligning the tap with the hole on the crank (E) until it snaps into place. To detach the crank, the hex wrench (FF) is required to press the tap to take the crank (E) out. Figure 1 1. Attach the crank without using the tap 2.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.
