Item #1002315854 Model #YG622-NI USE AND CARE GUIDE NOVAK OSCILLATING 14 IN. CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-800-986-3460 HOMEDEPOT.
Table of Contents Table of Contents .......................................................... 2 Operation ......................................................................13 Remote Control Operating Instructions ..................................13 Safety Information ......................................................... 3 Care and Cleaning .......................................................14 Warranty .........................................................................
Safety Information 1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before beginning. 2. All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70-1999” and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. 3. The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 35 (15.9 kg) lbs.
Warranty We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware shown to actual size unless noted otherwise in the table below. EE AA FF BB GG CC HH DD Part II Description Quantity AA Plastic wire nut 3 BB Canopy mounting screw (preassembled) 2 CC Clevis pin (preassembled) 1 DD Cotter pin (preassembled) 1 EE Collar setscrew (preassembled) 2 FF Cross pin (preassembled) 1 GG Setscrew (preassembled) 1 HH 1.5V AAA battery (not to scale) 2 Plastic wire nut 6 II 5 HOMEDEPOT.
Pre-Installation (continued) PACKAGE CONTENTS A B C D E F G H Quantity Part A Mounting bracket (preassembled) 1 E Coupling cover 1 B Canopy 1 F Fan motor assembly 1 C Canopy bottom cover (preassembled) 1 G Receiver 1 D Hanger ball/downrod assembly 1 H Remote control 1 Part Description 6 Description Quantity
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock, or other personal injury, mount the fan only on an outlet box or supporting system marked acceptable for fan support of 35 lbs (15.9 kg) or less and use mounting screws provided with the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.
Assembly 1 2 Preparing the canopy Preparing the motor □ Remove the canopy bottom cover (C) from the canopy (B) by turning the canopy bottom cover (C) counterclockwise. □ Remove the cotter pin (DD) and clevis pin (CC), and loosen the two collar setscrews (EE) from the motor collar.
Assembly — Hanging the Fan 4 5 Installing the mounting bracket to the electrical box □ WARNING: To reduce the risk of fire, electric shock, or other personal injury, mount the fan only on an outlet box or supporting system marked acceptable for fan support of 35 lbs (15.9 kg) or less and use mounting screws provided with the outlet box. □ Pass the 120-volt supply wires through the center hole in the mounting bracket (A).
Assembly — Hanging the Fan (continued) Preparing the receiver and remote control 7 H NOTE: The frequencies on your receiver and remote control have been preset at the factory. Before installing the receiver, make sure the dip switches on the receiver and remote control are set to the same frequency. The dip switches on the remote control are located inside the battery compartment.
Assembly — Hanging the Fan (continued) WARNING: Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire nuts, except for the ground wire. CAUTION: Do not use with a wall light dimmer switch. □ If your outlet box (JJ) has a ground wire (green or bare copper) connect it to the fan ground wires; otherwise connect the hanger ball/downrod assembly (D) ground wire to the mounting bracket (A).
Assembly — Hanging the Fan (continued) 9 10 Installing the canopy WARNING: Make sure the tab on the mounting bracket (A) properly sits in the groove in the hanger ball/downrod assembly (D) before attaching the canopy (B) to the mounting bracket (A) by turning the canopy until it drops into place. □ Tuck the connections neatly into the ceiling outlet box (JJ).
Operation REMOTE CONTROL OPERATING INSTRUCTIONS - Press and release the button to turn the fan on or off. - Press and release 1 time - turns the fan on high speed. - Press and release 2 times - turns the fan on medium speed. - Press and release 3 times - turns the fan on low speed. - Press and release 4 times - turns the fan off. - This button is used for oscillating operation. Press “ ” to set the fan to oscillation. Press “ ” to turn off the oscillation.
Care and Cleaning Do □ Do not Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. Because of the fan’s natural movement, some connections may become loose over time. It is not necessary to remove the fan from the ceiling. □ Clean your fan periodically. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing.
Service Parts A AA G B C FF BB GG H D CC E HH DD F EE Description Part Description A Mounting bracket (preassembled) AA B Canopy BB Canopy mounting screw (preassembled) C Canopy bottom cover (preassembled) CC D Hanger ball/downrod assembly DD Cotter pin (preassembled) E Coupling cover EE Collar setscrew (preassembled) F Fan motor assembly FF Cross pin (preassembled) G Receiver GG Setscrew (preassembled) H Remote control HH 1.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
