OMSID # 207000441 Model # WSFP60ECHD-19 ASSEMBLY INSTRUCTIONS Montauk Shore 60 in. Media Console with Infrared Electric Fireplace in Antique White & Medium Cherry Finish Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.
Table of Contents Hardware Included ....................................................................3 Package Contents .....................................................................4 Assembly .......................................................................... 5 Care and Maintenance .......................................................16 Table of Contents ............................................................... 2 Safety Information .................................................
Pre-Assembly (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS A J F I H G K L B R M C N O Q P D U S T E Part A B C D E F G H I J K L M Description Top panel Center shelf Bottom panel Bottom back stretcher Bottom front molding Left lower side panel Right lower side panel Left lower partition panel Right lower partition panel Left door Right door Left lower back panel Left upper side panel V Quantity 1 1 1 1 1 1 1 1 1 1 1 1 1 Part N O P Q R S T U V 4 Description Right upper side panel Left upper partition
Assembly 1 Screwing the cam bolts NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. □ □ Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty carton to avoid any scratches.
Assembly (continued) 3 □ □ Assembling the cam bolts and magnetic catches Securely screw the cam bolts (CC) into the designated plastic bushings on the center shelf (B) on both sides. Align two magnetic catches (EE) to the pilot holes on the center shelf (B) with the magnetic plates facing the finished edge. Then attach the magnetic catches (EE) in place using two pan head screws (DD) per catch.
Assembly (continued) 5 □ Installing the bottom back stretcher Align and attach the bottom back stretcher (D) to the bottom panel (C) by using four wood dowels (AA) and four cam locks (BB). D C 6 □ Attaching the lower partition panels Glue four wood dowels (AA) into the inner holes of the lower partition panels (H and I) and attach them to the bottom panel (C) by using four long wood screws (JJ). I H AA AA C JJ JJ 7 HOMEDEPOT.
Assembly (continued) 7 □ □ Installing the lower side panels Glue six wood dowels (AA) into the inner holes of the bottom panel assembly at both ends. Align the large holes on both side panels (F and G) with the inserted wood dowels (AA) and press them together. Attach the side panels (F and G) in place by engaging six cam locks (AA), as shown.
Assembly (continued) 9 □ □ Installing the center shelf Glue eight wood dowels (AA) into the top inner holes of the previous assembly. Ask for assistance to position the center shelf (B) onto the inserted wood dowels (AA). Attach the center shelf (B) in place by engaging eight cam locks (BB). G B AA I H F 10 Attaching the upper side panels and partition panels □ Glue eight dowels (AA) into the inner holes of the upper side panels (M and N) and partition panels (O and P).
Assembly (continued) 11 □ Attaching the top panel Glue eight wood dowels (AA) into the top inner holes on the upper side panels (M and N) and partition panels (O and P). Position the top panel (A) onto the inserted wood dowels (AA) and fasten it in place with eight cam locks (BB). N A P O M 12 □ □ Attaching the bottom front molding Align and attach the bottom front molding (E) to the lower side panels (F and G) with four medium wood screws (KK).
Assembly (continued) 13 Installing the metal plate □ Flip the assembled unit around at its front edges. Fasten the middle crossbar (S) to the middle stiles (T) by attaching two metal plates (PP) at the joints, using two screws (HH) in each, as shown. HH H S PP I 14 Attaching the back panel □ □ Pick up the upper back panel (R) and align the pre-drilled holes against the upper long edge with the pilot holes on the back stretcher of the top panel (A).
Assembly (continued) 15 □ □ □ Installing the adjustable shelves and cam lock covers Stand the unit upright. Insert four shelf pins (MM) into the holes at your desired height inside each side compartment. Tilt and rest the adjustable shelves (Q) onto the shelf pins (MM) and secure in place with the short wood screws (HH). Plug the cam lock covers (LL) onto the visible cam locks to conceal the cams.
Assembly (continued) 17 □ Installing the drawers To insert the drawers (U) into the frame, extend the ball bearing slide tracks on the upper side panels (M and N) and partition panels (O and P) all the way forward (including ball bearing cart). Align the slide runners on the drawers (U) with the slide tracks, and then push the drawer carefully inside until it stops. NOTE: If a drawer does not go in smoothly, please take it out and repeat the step.
Assembly (continued) 19 Attaching the L-shaped metal braces □ Using the pilot holes as a guide, align and attach two L-shaped metal braces (FF) to the bottom panel (C) by screwing one washer head screw (II) in each.
Assembly (continued) 20 Installing the acrylic stopper □ □ Remove the tape from the acrylic stopper (QQ) and place it in the cut-out of the acrylic stopper template on the top panel (A). Make sure that it is properly aligned before applying pressure. At the back of the top panel (A), carefully pull out the thumb tacks to remove the acrylic stopper template. NOTE: You must install the acrylic TV stopper to prevent TV from tipping when placing your flat panel television on the top panel.
Care and Maintenance A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or shipping. To clean and care for your furniture: □ □ □ □ □ □ □ □ □ □ Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polishes is not necessary. Should you choose to use polishes, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish.
