OMSID # 207000449 OMSID # 207000508 OMSID # 207000499 Model # WSFP48ECHD-18 # WSFP48ECHD-18A # WSFP48ECHD-18B ASSEMBLY INSTRUCTIONS Bellevue Park 48 in. Media Console with Infrared Electric Fireplace Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.
Table of Contents Table of Contents.................................................................. 2 Safety Information................................................................ 2 Warranty .............................................................................. 2 Pre-Assembly ....................................................................... 2 Planning Assembly .......................................................... 2 Tools required ....................................................
Pre-Assembly (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS I H E J K A F B N L G M C S D P O Part Description Q T U R Quantity Part Description Quantity A Top panel 1 M Center front molding 1 B Center shelf 1 N Adjustable shelf 2 C Bottom panel 1 O Left lower side panel 1 D Upper back panel 1 P Right lower side panel 1 E Bottom back stretcher 1 Q Left lower partition panel 1 F Bottom front stretcher 1 R Right lower partition panel 1 G Bottom front molding 1 S L
Assembly 1 Screwing the cam bolts NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. □ □ Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty carton to avoid any scratches.
Assembly (continued) 3 Installing the upper side panels and upper partition panel NOTE: Refer to the dowel and cam lock assembling guide drawings in this step for further clarification on how to properly glue in the wooden dowels and install cam locks. Apply this method whenever instructed to install wood dowels and cam locks. □ □ Glue four long wood dowels (CC) into the drilled holes on the upper side panels (H) and attach them to the top panel (A) by engaging four cam locks (AA).
Assembly (continued) 5 □ Attaching the center crossbar assembly Align and attach the center crossbar assembly to the center shelf (B) with two long wood dowels (CC) and three cam locks (AA). L M CC AA B 6 Installing the center shelf assembly □ Glue five long wood dowels (CC) into the inner holes at the bottom of the upper panels (H and I). Properly position the center shelf (B) onto the inserted wood dowels (CC) and secure in place by engaging six cam locks (AA). CC A H I H AA B 7 HOMEDEPOT.
Assembly (continued) 7 □ □ Attaching the middle stiles Fasten one middle stile (U) to the left lower partition panel (Q) with two long wood dowels (CC) and two cam locks (AA). Repeat the same procedure to combine the other middle stile (U) and right lower partition panel (R) together. U U AA CC R Q 8 Installing the lower side and partition panels □ □ □ Glue four long wood dowels (CC) into the top inner holes of left lower side and partition panels (O and Q).
Assembly (continued) 9 □ □ Attaching the bottom panel Glue eight long wood dowels (CC) into the bottom inner holes of the lower vertical panels (O, P, Q and R). Align the large holes on the bottom panel (C) with the inserted wood dowels (CC) and press them together. Secure the bottom panel in place with eight long wood screws (EE).
Assembly (continued) 11 Attaching the bottom moldings □ □ □ Align and attach the bottom left molding (J) to the bottom back stretcher (E) with one long wood dowel (CC) and one cam lock (AA). Using the pilot holes as a guide, fasten two corner connectors (MM) at the bottom joints between the bottom left molding (J) and the bottom panel (C) using four pan head screws (II). Tighten all screws with a Phillips screwdriver. Repeat the same procedure to attach the bottom right molding (K) at the opposite end.
Assembly (continued) 13 Attaching the bottom front molding assembly □ Align and attach the assembled bottom front molding (G) to the bottom side moldings (J and K) and the bottom panel (C). Using the pilot holes as guide, fasten eight corner connectors (MM) at the bottom joints using two pan head screws (II) per connector. Tighten all screws with a Phillips screwdriver.
Assembly (continued) 15 Screwing the floor levelers □ Tightly screw two floor levelers (RR) into the installed triangle metal plates (QQ). QQ K RR G C QQ RR J 16 Installing the metal plate □ Flip the assembled unit around at its front edges. Secure the middle crossbar (L) to the middle stiles (U) by attaching two metal plates (LL) at the joints, using two short wood screws (GG) in each, as shown.
Assembly (continued) 17 Attaching the back panels □ Pick up the upper back panel (D) and align the pre-drilled holes against the upper long edge with the pilot holes on the back stretcher of the top panel (A). Attach the back panel (D) in place using the provided washer head screws (HH). □ Align and attach two lower back panels (S) to the lower side panels and partition panels (O, P, Q and R) with the provided washer head screws (HH).
Assembly (continued) 19 Attaching the adjustable shelves and cam lock covers □ □ Insert four shelf pins (KK) into the desired holes inside each side compartment. Tilt and rest the adjustable shelves (N) onto the shelf pins (KK). Plug the cam lock covers (JJ) onto the visible cams locks to conceal the cams. JJ KK P Q R N O N KK 20 □ Installing the fireplace insert Lift the fireplace insert carefully into the back of the assembled mantel and center it in the opening.
Assembly (continued) 21 □ Attaching the L-shaped metal braces Using the pilot holes as a guide, align and attach two L-shaped metal braces (TT) to the bottom panel (C) by screwing one pan head screw (II) in each. II TT 15 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Assembly (continued) 22 Attaching the acrylic stopper □ □ Remove the paper backing of the acrylic stopper (SS), then properly align the acrylic stopper into the cut-out on the acrylic stopper template on the front of the top panel (A). Press down on the acrylic stopper to help adhesion. At the back of the top panel (A), carefully pull out the thumb tacks to remove the acrylic stopper template.
Care and Maintenance A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or shipping. To clean and care for your furniture: □ Use a soft, clean cloth that will not scratch the surface when dusting. □ Use of furniture polishes is not necessary. Should you choose to use polishes, test first in an inconspicuous area. □ Using solvents of any kind on your furniture may damage the finish.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.
