Model # WSFP42HD-11 # WSFP42ECHD-12 # WSFP42ECHD-13 OMSID # 207000933 OMSID # 207000937 OMSID # 207000934 ASSEMBLY INSTRUCTIONS Coleridge 42 in. Mantel Console with Infrared Electric Fireplace Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.
Table of Contents Table of Contents................................................................... 2 Safety Information................................................................. 2 Warranty ................................................................................ 2 Pre-Assembly ........................................................................ 2 Planning Assembly........................................................... 2 Tools required ...............................................
Pre-Assembly (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS A E F K L I H G J B C D O Part Description M N R P Q Quantity Part Description Quantity A Top panel 1 K Left lower side panel 1 B Center shelf 1 L Right lower side panel 1 C Base 1 M Lower back panel 2 D Back panel 1 N Lower front panel 2 E Left upper side panel 1 O Adjustable shelf 2 F Barrister door left support 1 P Barrister door 1 G Barrister door right support 1 Q Center crossbar 1 H Right upper
Assembly 1 Screwing the cam bolts NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. □ □ Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty carton to avoid any scratches.
Assembly (continued) 3 □ □ Attaching the magnetic catches Flip the center shelf (B) around. Align two magnetic catches (LL) to the pilot holes on the center shelf (B). Keep the magnetic plates facing the finished edge. Then attach the magnetic catches (LL) in place using two long pan head screws (GG) per catch.
Assembly (continued) 5 □ Installing the upper side panel assemblies Glue six wood dowels (CC) into the inner holes drilled on the top edge of upper side panel assemblies (E, H and R) and attach them to the top panel (A) by engaging four cam locks (AA). H AA CC E A 6 □ □ Installing the corner connectors Using the pilot hole as a guide, fasten one corner connector (NN) to the front bottom corner of barrister door left support (F) with one short pan head screw (XX).
Assembly (continued) 7 □ Attaching the barrister door supports Glue four wood dowels (CC) into the inner holes on the upper edge of the barrister door supports (F and G) and attach them to the top panel (A) by engaging four cam locks (AA). G AA F H CC A E 8 □ □ Securing the barrister door supports Fasten the barrister door supports (F and G) to the back stretcher of the top panel (A) with two long wood screws (DD).
Assembly (continued) 9 □ Attaching the center crossbar Align and attach the center crossbar (Q) to the center shelf (B) with two wood dowels (CC) and three cam locks (AA). Q CC AA B 10 □ □ Installing the center shelf Glue six wood dowels (CC) into the inner holes at the bottom edge of the upper side panels (E and H) and front moldings (R). Properly position the center shelf (B) onto the inserted wood dowels (CC) and secure in place by engaging four long wood screws (DD).
Assembly (continued) 11 Combining the lower panels □ Glue two wood dowels (CC) into the inner holes of left lower side panel (K) and attach it to one lower front panel (N) by engaging two cam locks (AA) as shown. □ Repeat the same procedure to combine the right lower side panel (L) and the other lower front panel (N) together.
Assembly (continued) 13 Installing the lower side panel assemblies □ Glue eight wood dowels (CC) into the top inner holes of both lower side panel assemblies. □ Align the large holes on the center shelf (B) with the inserted wood dowels (CC) and press them together. Secure the lower side panel assemblies in place by engaging twelve cam locks (AA).
Assembly (continued) 15 □ Securing the base Insert four long wood screws (DD) through the drilled holes on the base (C) and securely screw into the lower side panels (K and L). N L M N C K DD DD DD M DD 16 □ Installing the metal plate Flip the assembled unit around at its front edges. Secure the middle crossbar (Q) to both lower front panels (N) by attaching two metal plates (KK) at the joints, using two short wood screws (EE) in each, as shown.
Assembly (continued) 17 Attaching the back panel □ Pick up the back panel (D) and align the drilled holes against the upper long edge with the pilot holes on the back stretcher of the top panel (A). Attach the back panel (D) in place using the provided washer head screws (FF). FF D B A 18 □ □ H Attaching the bottom pivot hinges Using the pilot holes as a guide, attach the left bottom pivot hinge (PP) to the left door (I) with two short wood screws (EE) as shown.
Assembly (continued) 19 □ □ □ □ Installing the left door Stand the assembled unit upright. Tilt and insert the pivot pin under the left door (I) into the plastic bushing pre-attached on the base (C). Attach the left upper pivot hinge (QQ) to the plastic bushing pre-attached on the center shelf (B) as shown. Make sure that the pivot hinge mounting plate will face inward. Fit the left door (I) to the inserted pivot hinge (QQ) making sure the mounting holes overlap the pilot holes on the door panel.
Assembly (continued) 21 Installing the adjustable shelves and cam lock covers □ □ Open the doors (I and J) and insert four shelf supports (JJ) into the desired holes inside each side compartment. Make sure you place the four shelf supports in the same level so the shelf is not tilted. Rest the adjustable shelves (O) onto the shelf supports (JJ). Plug the cam lock covers (II) onto the visible cam locks to conceal the cams.
Assembly (continued) 23 □ Installing the fireplace insert Lift the fireplace insert carefully into the back of the assembled mantel and center it in the opening. DO NOT drag the insert across the bottom panel (C) as it may scratch the unit. C 24 Attaching the L-shaped metal braces □ Using the pilot holes as a guide, align and attach two L-shaped metal braces (HH) to the base (C) by screwing one short pan head screw (XX) in each.
Assembly (continued) 25 Installing the acrylic stopper □ □ Remove the paper backing of acrylic stopper (RR), then properly align the acrylic stopper into the cut-out on the acrylic stopper template on the front of the top panel (A). Press down on the acrylic stopper to help adhesion. At the back of the top panel (A), carefully pull out the thumb tacks to remove the acrylic stopper template.
Care and Maintenance A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or shipping. To clean and care for your furniture: □ Use a soft, clean cloth that will not scratch the surface when dusting. □ Use of furniture polishes is not necessary. Should you choose to use polishes, test first in an inconspicuous area. □ Using solvents of any kind on your furniture may damage the finish.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
