Instructions / Assembly

Fig. 1
1
3
4
5
2
Fig. 2
1
2
3
3
A
A
D
B
B
C
C
D
Fig. 3
Page 2/2
6
ASSEMBLY INSTRUCTIONS:
Final View
Fig. 4
ASSEMBLY INSTRUCTIONS OF LAILA METAL INLAY KING / QUEEN BED
CAC-4NOV2017
Step 1: Take out all parts supplied on a clean surface as shown
in fig. 1.
Step 2: Take out the bolts, washers and Allen key provided in
the Hardware Pack.
Step 3: Match Side Rail (3) to Head Board (1) 'A' to 'A' &
Foot Board (2) 'D' to 'D'. Insert bolts and tighten with
allen key provided as shown in figure 2.
Step 4: Match another Side Rail (3) to Head Board (1) 'B' to
'B' & Foot Board (2) 'C' to 'C'. Insert bolts and tighten
with allen key provided as shown in figure 2.
Step 5: Fix the Center Support leg (6) to the middle of Center
Rail as shown in Fig. 3, and place the Center Rail (4)
as shown in fig. 3.
Step 6: Place the wooden slats as shown in fig. 4.
Your Bed is ready