Instructions / Assembly

10
Assembly (continued)
6
Assembling the drawer
a) Install dowel (AA) and bolt (BB) into panel (G).
b) Insert lock (CC) into support bar (L).
Tighten panels (I) and (H) to panel (G) with screw (DD).
Join support bar (L) to panel (G) with dowel (AA).
c) Slide panel (K) into the grooves on panels (I) and (H).
Tighten bolt (BB) with lock (CC) in the pre-drilled hole.
d) Tighten panel (J) to the assembled body
e) Tighten knob (FF) to panel (G) with bolt (EE).
Insert metal bar (O) into panels (G) and (J).
with screw (DD) and dowel (AA).
NOTE:
To hang a row of legal size file,please take 2 metal
bars and install at the suggested positions as the image shows.
NOTE:
To hang two rows of letter size file,please take 3 metal
bars and install at the suggested positions as the image shows.