Instructions / Assembly

Assembly — Installing the Light Kit

CAUTION: Before starting installation, disconnect the power

by turning off the circuit breaker or removing the fuse at the

fuse box. Turning power off using the fan switch is not sufcient

to prevent electric shock.

Installing the LED light kit to the

light kit mounting plate

While holding the 20W LED light kit (I) under the fan motor

assembly (F), snap together the wire connection plugs (RR):

White to white

Black to black

Position the notches (SS) in the outer rim of the 20W LED

light kit (I) so they line up with the tabs (TT) on the inside of

the rim on the light kit mounting plate (UU). Carefully lift the

20W LED light kit (I) up inside the light kit mounting plate (UU)

and secure it to the fan by turning the 20W LED light kit (I)

clockwise until snug.

NOTE: If the light kit could be wobbled by hand, it means the

light kit is not twisted completely till the right position. Keep

twisting the light kit till it could not be wobbled by hand.