Instructions / Assembly

Operation (continued)

– button, decreases fan speed

Pressing and releasing the - button one time will decrease the speed of the fan. Each setting decrease will cause the LED bar to

dim slightly more, until the fan has reached the minimum speed setting. At that time the LED bar will be approximately 25%

illuminated.

Pressing and holding the - button will decrease the fan speed automatically through the speed settings and the reductions will be

denoted on the LED bar. When the LED bar is 25% illuminated, the fan has reached the minimum speed setting.

Pressing the - button while in Comfort Breeze

mode will automatically cancel the Comfort Breeze

mode and resume normal fan

operation.

Comfort Breeze

There are three Comfort Breeze

settings. Pressing the button will activate the Comfort Breeze

mode and the LED bar will illuminate

slowly from bottom to top to display the current setting.

Setting 1: Alternates through speeds 1 – 3, the LED bar should ﬁll approximately 33%.

Setting 2: Alternates through speeds 4 – 6, the LED bar should ﬁll approximately 66%.

Setting 3: Alternates through speeds 7 – 9, the LED bar should be fully illuminated.

NOTE: If you are using Comfort Breeze

mode, pressing the button or the fan speed buttons will cancel Comfort Breeze

mode and

resume normal fan operation.

Off Setting 1 Setting 2 Setting 3 Disable Comfort Breeze

Timer

Pressing the timer button will automatically turn fan and light (if light is on) off after 2, 4, or 8 hours. When you activate the timer

mode, the LED to the left of the time above the clock will illuminate.

Fan reverse button - Must be pushed when the fan is in operation.

Warm weather: LED bar will illuminate and the lights will ﬂow from high to low.

Cool weather: LED bar will illuminate and the lights will ﬂow from low to high.

Off 2H 4H 8H Disables timer

Please contact 1-877-592-5233 for further assistance.

HOMEDEPOT.COM/HUBSPACE