Instructions / Assembly

Warm weather

(Forward)

Comfort Breeze

LED bar

Scale indicating

fan speed

Timer

Power on/off

Cool weather

(Reverse)

Fan on and decreases fan speed*

Fan on and increases fan speed*

NOTE: The fan will store the last used speed setting for the next time it is turned on.

NOTE: You must turn the fan on prior to using the speed or time functions.

NOTE: On each start up of your ceiling fan, the fan blades will oscillate back and forth. This is a NORMAL OPERATION for DC motor ceiling

fans as they go through a calibration cycle. The fan is NOT DEFECTIVE.

OPERATING YOUR FAN AND REMOTE CONTROL

Fan button - Press and release the button to turn the fan on or off.

When turned on, the fan will begin spinning using its last speed settings. The remote control’s LED bar will display the speed

setting for 5 seconds.

When turned off, the fan will stop spinning and the light from the remote control’s LED bar will quickly darken from top to bottom.

Speed functions

+ button, increases the fan speed

Pressing and releasing the + button one time will increase the speed of the fan. Each setting increase will cause the LED bar to

illuminate slightly more, until the fan has reached the maximum speed setting. At that time the LED bar will be fully illuminated.

Pressing and holding the + button will increase the fan speed automatically through the speed settings and the increments will be

denoted on the LED bar. When the LED bar is fully illuminated, the fan has reached maximum speed setting.

Pressing the + button while in Comfort Breeze

mode will automatically cancel the Comfort Breeze

mode and resume normal fan

operation.

Operation (continued)