Item #1008 615 003 1008 614 912 1008 614 771 Model #N383C-MBK N383C-MBK+V8 N383C-MWH USE AND CARE GUIDE 72 IN. TAGER INDOOR/COVERED OUTDOOR CEILING FAN Questions, problems, missing parts? Before returning to the store, call Hubspace Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-592-5233 HOMEDEPOT.COM/HUBSPACE Visual instruction of how to install this fan: Visit www.homedepot.
Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pre-installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Assembly . . . . . . . . . . . . . . . .
Warranty The manufacturer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. The manufacturer warrants the light kit (excluding any glass), to be free from defects in workmanship and material present at time of shipment from the factory for a period of five years after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB DD CC Part Description Quantity AA Plastic wire nut Blade attachment screw with lock washer (additional) 3 BB CC 1.
Pre-Installation (continued) PACKAGE CONTENTS A B C D E G F H I Part Description K J Quantity Part G Description Quantity A Mounting bracket 1 B Canopy 1 C Canopy bottom cover (preassembled) 1 D Hanger ball/downrod assembly 1 I Decorative cover 1 E Coupling cover 1 J Receiver 1 F Fan motor assembly 1 K Remote control 1 H 5 Blade 3 Blade support plate with screw and lock washer 3 HOMEDEPOT.COM/HUBSPACE Please contact 1-877-592-5233 for further assistance.
Installation MOUNTING OPTIONS NOTE: You may need a longer downrod to maintain proper blade clearance when installing on a steep, sloped ceiling. The maximum angle allowable is 18° away from horizontal. If the canopy (B) touches the hanger ball/downrod assembly (D), remove the decorative canopy bottom cover (C) and turn the canopy (B) 180° before attaching the canopy (B) to the mounting bracket (A).
Assembly — Attaching the Fan Blades 1 2 Preparing the canopy Attaching the fan blades IMPORTANT: Make sure blade screw holes are aligning with correct holes on the motor assembly. There are alignment lines between screws holes on the motor assembly for checking. Remove the canopy bottom cover (C) from the canopy (B) by turning the canopy bottom cover (C) counterclockwise. Attach the blade (G) to the fan motor assembly (F).
Assembly — Hanging the Fan 4 Assembling the fan DD WARNING: Failure to properly install the cotter pin (FF) could result in the fan loosening and possibly falling. KK NOTE: If a longer downrod (not included) is needed, take out the screw located in the hanger ball (JJ), lower the hanger ball (JJ) and remove the pin (KK). Remove all three pieces from the downrod and assemble them onto the new longer downrod before proceeding to the downrod installation.
Assembly — Hanging the Fan (continued) 5 6 Attaching the mounting bracket to the electrical box Hanging the fan on the mounting bracket WARNING: The tab in the ring must rest in the groove of the hanger ball/downrod assembly (D). Failure to properly seat the tab in the groove could cause damage to the wiring.
Assembly — Hanging the Fan (continued) 7 Making the electrical connections White Black Ground conductor WARNING: Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire nuts (except for the ground wire). Outlet Box CAUTION: To reduce the risk of electric shock, this fan must be installed with an isolating wall control/switch. A NOTE: The fan must be installed at a maximum distance of 20 ft.
Assembly — Hanging the Fan (continued) 8 Finishing the fan installation WARNING: Make sure the tab on the mounting bracket properly sits in the groove in the hanger ball before attaching the canopy to the bracket by turning the housing until it drops into place. Outlet Box A EE NN NOTE: Adjust the canopy mounting screws as necessary until the canopy and canopy bottom cover are snug. Make sure connections are neatly tucked into the ceiling outlet box.
Operation SETTING UP THE TRANSMITTER NOTE: The remote has been pre-paired in the factory for your convenience. K LEARN APRENDER NOTE: Batteries will weaken with age and should be replaced before leaking takes place as this will damage the remote control. Dispose of used batteries properly and keep them out of the reach of children. Remove the battery cover by pressing firmly on the arrow and sliding the cover off. CC Install two 1.5V AAA batteries (CC) (included).
Operation (continued) To clear all other remotes from your fan’s memory, use the steps below: Ensure AC power to the fan is OFF to begin the learning process. Slide the dip switch in the battery compartment to the "0" position. LEARN K 13 LEARN Within 60 seconds of turning AC power ON, press and release the “LEARN” button located in the remote’s battery compartment , and your fan will restore to the original setting and dismiss the other remotes. APRENDER Turn the fan’s AC power ON. HOMEDEPOT.
Operation (continued) Power on/off Fan on and increases fan speed* LED bar Scale indicating fan speed Fan on and decreases fan speed* Comfort BreezeTM Timer Warm weather (Forward) Cool weather (Reverse) OPERATING YOUR FAN AND REMOTE CONTROL NOTE: The fan will store the last used speed setting for the next time it is turned on. NOTE: You must turn the fan on prior to using the speed or time functions. NOTE: On each start up of your ceiling fan, the fan blades will oscillate back and forth.
Operation (continued) – button, decreases fan speed Pressing and releasing the - button one time will decrease the speed of the fan. Each setting decrease will cause the LED bar to dim slightly more, until the fan has reached the minimum speed setting. At that time the LED bar will be approximately 25% illuminated. Pressing and holding the - button will decrease the fan speed automatically through the speed settings and the reductions will be denoted on the LED bar.
Operation (continued) INSTALLING THE REMOTE CONTROL HOLDER Attach the remote control holder (PP) with the two remote control holder mounting screws (QQ). RR Replace the remote control holder cover (RR) into the remote control holder (PP). QQ PP WARM/COOL WEATHER OPERATING INSTRUCTIONS Speed settings for warm or cool weather depend on factors such as the room size, ceiling height, numbers of fans. NOTE: The fan reverse buttons must be pressed while the fan is running.
Operation — Application Setup NOTE: For more information on smart remote setup, please refer to the quick start guide located in the remote pack. NOTE: To use Alexa to change the white temperature of the light, please make sure the light is turned on first. Questions, problems missing parts? Please call Hubspace Customer service 8 a.m. - 7 p.m. EST, Monday - Friday; 9 a.m. - 6 p.m.
Operation — Voice Commands The Tager 72 in. Ceiling Fan works with Alexa and Google Assistant. This section lists some of the voice commands you can use. To view these and other commands, go to http://hubspaceconnect.com/. Google Alexa When you want to... Ask Alexa to... When you want to... Ask Google to... Turn on the fan only. … turn on fan power. Turn on the fan only. … turn on fan power. Turn off the fan only. … turn off fan power.
Care and Cleaning Do Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. Because of the fan’s natural movement, some connections may become loose over time. It is not necessary to remove the fan from the ceiling. Clean your fan periodically. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing.
Troubleshooting (HubspaceTM) Problem Solution My hubspace device is not connecting to Wi-Fi. Make sure your device is connected to a power source. Your Internet connection or Wi-Fi network may be down. My device cannot find any Wi-Fi networks. Make sure you have a 2.4GHz capable Wi-Fi network within range of the device you are trying to add. My device is in a location that does not have Wi-Fi. Can I still use it with the Hubspace app? Yes: Use the app on a phone with an Internet connection like LTE.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
