Installation Guide
PAGE 10
WALL TRACK INSTALLATION
1.1-1.2. Position the wall track (B) as illustrated. Level the track (B) and mark the track holes positions.
1.3. Remove the track and drill pilot holes in the marked locations with a ø5/16 in drill bit.
1.4. If there are no studs located behind the wall track (B), then insert the wall anchors (AA) using a rubber mallet until the wall
anchors are ush with the wall.
1.5. Replace and secure the track (B) with screws (BB). Do not overtighten.
1
13/16 in
B
ø5/16 in
BB
1.1
1.2
1.3
1.5
AA
1.4
WARNING!
If there are no studs aligned
to the wall track behind the
drywall, use the wall anchors
to ensure the screws won’t
become loose.
B
B
AA
B
B
BB
RIGHT DOOR OPENING
LEFT DOOR OPENING