Instructions / Assembly

PAGE 10
NEXT STEP MAY REQUIRE TO TRIM THE FRAME TRACKS (E1 & E2)
If the Frame tracks are too long for your wall-to-wall opening ā€œDā€, you will have to
trim them down. Below calculation is for reference only: Ensure you made all the
proper measurements before you cut the tracks.
ONLY CUT THE TRACKS ON DOOR SIDE!
1. Measure the distance ā€œDā€ at the height where the tracks will be installed.
2.
If D < 58 3/16 in,
cut the tracks to a total length of L = D - 3 3/8 in
D
1
L = D - 3 3/8 in
2
E2
E1
L
L
ONLY CUT THE
TRACKS ON THIS
SIDE (DOOR SIDE)!