Full Product Manual

19
Base Cabinets
Island Skin
ISK4848
48"
48"
- 3/16" thick matching exterior
- Field modified and installed
- Available in all finishes
- CN and MG are veneer
faced plywood
- PW is painted plywood
- All other colors are
melamine over MDF
Island V-Groove Skin
IVGSK4848
48"
48"
- 3/16" thick wood veneer
v-groove exterior
- Grooves spaced 1¼"
on center
- Field modified and installed
- Available in CN, MG and
PW only
design tip
ready-to-assemble
Our nished end
panels are 3/4" thick,
so adding them to
unnished sides can
sometimes throw off
alignment of uppers
to bases. Balance
out wall and base
alignment with llers
used as 'spacers' to
keep wall and base
measurements even.
design tip
ready-to-assemble
Use a Toe Kick/Framing Strip
(TKFS96) to trim out the tops and
bottoms of wall cabinets. Align
the face of the framing strips
with the face of Wall Finished
End Panels for a truly "inset"
appearance.