Instructions / Assembly

Installing the canopy

□ Slide the canopy (D) up to the mounting bracket (A)

and place the key hole on the canopy (D) over the

loose canopy mounting screws (BB) on the mounting

bracket (A). Turn the canopy (D) clockwise until the

canopy (D) locks in place at the narrow section of the

key holes.

□ Align the circular hole on the canopy (D) with the

remaining hole on the mounting bracket (A). Secure

the canopy mounting screws (BB) previously removed

in the hole, and tighten the two canopy mounting

screws (BB).

WARNING: Make sure the tab on the mounting bracket (A)

properly sits in the groove in the hanger ball/downrod

assembly (F) before attaching the canopy (D) to the mounting

bracket (A) by turning the canopy housing until it drops into

place.

NOTE: Adjust the canopy mounting screws (BB) as

necessary until the canopy (D) and canopy bottom cover (E)

are snug.

Attaching the canopy

bottom cover

Assembly — Hanging the Fan (continued)

□ Attach the canopy bottom cover (E) to the canopy (D) by

inserting the canopy mounting screws (BB) into the key

slots in the canopy bottom cover (E) and rotating the

canopy bottom cover (E) clockwise.

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.