Instructions / Assembly

Assembly — Hanging the Fan
5
Attaching the mounting
bracket to the ceiling
Hanging the fan from the
mounting bracket
□ Carefully lift the fan motor assembly (H) up to the
mounting bracket (A) and seat the hanger
ball/downrod assembly (F) in the mounting bracket
(A) socket. Make sure the tab on the mounting
bracket (A) socket is properly seated in the groove in
the hanger ball/downrod assembly (F). This will help
to balance the ceiling fan.
6
WARNING: The tab in the ring must rest in the groove of
the hanger ball/downrod assembly (F). Failure to properly
seat the tab in the groove could cause damage to the wiring.
F
H
10
□ Pass the 120-volt supply wires through the center
hole in the mounting bracket (A).
□ Attach the mounting bracket (A) to the outlet box (PP)
with the screws and washers provided with the outlet
box (PP).
□ Securely tighten the two mounting screws.
□ Attach mounting neck (C) onto the mounting bracket
(A). You have to rotate the mounting neck (C) to align
the four screw holes, Secure mounting neck (C) to
the mounting bracket (A) with four neck of the
mounting bracket screws (CC) to become a complete
mounting bracket (A).
WARNING: To reduce the risk of re, electric shock or
other personal injury, mount the fan only to an outlet box or
supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.
A
A
PP
C
CC