Users Manual

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly - Blade Installation

Installing the blades

□ Attach a blade (F) to the fan motor assembly (E) by inserting

the blade (F) into slots in the side of the fan motor

assembly (E) and aligning the three screws holes in the

blade with the holes in the center ywheel and secure with

screws (BB).

□ Make sure all the screws are rmly tightened.

□ Repeat these steps for the remaining blades.

Attaching the blade support plate

□ Remove the paper backing from the adhesive lm on the

back side of the blade support plate (J).

□ With the adhesive side of the support plate (J) facing towards

the blade (F), align the three holes in the blade (F) with the

three holes on the support plate (J) and rmly press the

support plate (J) to the blade (F).

□ Repeat these steps for the remaining support plates.