Instructions / Assembly

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly - Hanging the Fan (continued)

Attaching the fan blades

□ Attach a blade (C) to the fan-motor housing (B) by inserting

the blade (C) into slots in the side of the fan motor housing

(B) and aligning the three screw holes in the blade with the

holes in the center ywheel and secure with screws (AA).

□ Make sure all the screws are rmly tightened.

Attaching the light kit tter

assembly

□ Attach the light kit tter assembly (D), remove the one

screw (HH) in the round hole, from the switch cup (JJ), and

loosen, but do not remove the other three screws.

□ Connect the blue wire exiting the bottom of the fan motor

assembly (B) with the black wire from the top of the light kit

tter assembly (D).

□ Connect the white wire exiting the bottom of the fan motor

assembly (B) with the white wire from the top of the light kit

tter assembly (D).

□ Push the light kit tter assembly (D) up to the light kit pan

so that the three loosened screw heads t into the keyhole

slots. Turn the light kit tter assembly (D) clockwise to

secure.

□ Re-install the screw (HH) that was removed in step 1.

□ Make sure all the screws are rmly tightened.