Instructions / Assembly
6
Operation
1
Turning on the light
□ Turn the light switch on to activate the xture.
Care and Cleaning
□ Clean the lamp with a soft, dry cloth.
□ Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem Possible Cause Possible Cause
The bulb will not light. The bulb is burned out. Replace the light bulb.
The power is off. Ensure the power supply is On.
There is a faulty wire connection. Check the wiring.
The circuit breaker is off. Ensure the circuit breaker is in the ON position.
The fuse blows or circuit
breaker trips when the
light is turned on.
There are crossed wires or the
power wire is grounding out.
Check the wire connections.
Contact a qualied electrician or call the Customer Service Team at
1-800-986-3460.
Installation (continued)
4
Securing the light xture
□ Secure the canopy (C) to the mounting unit (AA) with the
screw collar ring.
NOTE: Maintain a tight waterproof seal between the
canopy and mounting surface.
C
5
Installing the light bulbs
□ Install two E12 candelabra 60-watt bulbs (not included).
A