Item # 1001 305 722 Model #151-100-4DS-NP USE AND CARE GUIDE GABRIEL 4-PIECE DEEP SEATING SET Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8.00 a.m. - 6.00 p.m., EST, Monday - Friday 1-800-986-3460 WWW.HOMEDEPOT.COM/HOMEDECORATORS THANK YOU e strive 4 to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Table of Contents Pre-Assembly ............................................................3 Planning Assembly ................................................................3 Hardware Included..................................................................3 Package Contents .................................................................. 3 Assembly ................................................................... 6 Table of Contents........................................................
Pre-Assembly (Rocking Chairs) PLANNING ASSEMBLY It will take at least two people about 40 minutes to complete the assembly process. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (3-seat Sofa) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (Table) HARDWARE INCLUDED NOTE: Hardware not shown to actual size. D2 E2 Part Description Quantity D2 E2 Washer (D6) Bolt (M6x16) 16 8 F2 Bolt (M6x25) Bolt Cap 8 G2 G2 F2 16 PACKAGE CONTENTS A2 C2 B2 Part Description A2 Table Top B2 C2 Leg Connector Bracket Table Leg Quantity 1 1 4 5 WWW.HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Assembly (Rocking Chairs) 1 Attaching the U-bar and the cross bars □ □ □ □ □ Place the armr See the diagram below. Plug two cross bars (D) into the armrest (A). Secure cross bars (D) with washers (L) and bolts (M) using hex wrench (N). Align the U-bar (C) to the armrest (A). Secure the U-bar (C) onto the armrest (A) with washers (H), lock washers (I) and bolts (J) using hex wrench (K).
Assembly (Rocking Chairs) 3 □ □ □ □ Attaching the chair seat to the chair base Place the chair seat (E) upside down. Align the rocking plates (1) of the chair base to the U-bar (2) of the chair seat (E). You may need to loosen the pre-installed bolts on U-bar (3) to line up. Clamp the U-bar (2) and the rocking plates (1) with washer plates (O).
Assembly (3-seat Sofa) 6 Attaching the armrests of the sofa □ □ □ Stand the armrest (A1) on a flat, smooth surface. Attach the seat panel (C1) to the armrest (A1) with washers (L) and bolts (I1) using hex wrench (N). Attach the armrest (B1) to the seat panel (C1) with washers (L) and bolts (I1) using hex wrench (N). Do not fully tighten bolts until the end of step 7.
Assembly (3-seat Sofa) 8 Attaching bolt caps and placing cushions □ □ Cover all the bolts with bolt caps (U1). Place cushions (#1, #3, #4 and #5) on the loveseat and secure seat cushions (#1) to the frame with hook and loop straps. Secure back cushions (#3 and #5) to the frame with fabric loops. U1 U1 U1 #4 #5 #3 #1 9 WWW.HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Assembly (Coffee Table) 9 Attaching table legs □ □ Attach the table legs (C2) to the table top (A2) with washers (D2) and bolts (E2) using the hex wrench (N). □ Do not fully tighten bolts (E2) until the end of step 10. C2 N E2 D2 A2 10 Attaching the leg connector bracket □ Align the leg connector bracket (B2) among the four table legs (C2) . □ Attach the table legs (C2) to the leg connector bracket (B2) with washers (D2) and bolts (F2).
Assembly (Coffee Table) 11 □ Covering bolts with bolt caps Cover all the bolts (E2) and (F2) with bolt caps (G2). G2 G2 12 Turning the table upright Level the table with foot glides when necessary. 11 WWW.HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8.00 a.m. – 6.00 p.m., EST, Monday-Friday 1-800-986-3460 WWW.HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.