DINING CHAIR UC-1 1/3
Hardware: A×8 F×1 B×8 D×4 C×1 Parts list: E×4 Back G×2 Φ8 Flat washer Φ8 Lock washer M8 Allen key H×2 M8x60MM M8x55MM Shorter Screw Longer Screw Hind Legs Front Legs 1 G Put chair back on a clean flat surface. Align Hind legs in the seat pad as shown in the diagram. C 60% DBA D B Using SHORTER SCREW (D) with Washer (#A,B). DO NOT FULLY TIGHTEN. A First HAND tighten then tightened using key up-to 60-80% only at this stage.
Put chair in the upright position and SIT ON THE CHAIR to press downwards on the seat pad ensuring that all 4 feet touch the ground and chair is leveled. Proceed to tighten all screws making sure the chair remains level when tightening. Check that all screws are tight on a regular basis to ensure chair remains level and secure. Also you can using adjustable feet to keep four legs level .
