Use and Care Manual

Page 13
Range Hood Operations (Continued)
Activating Light Function:
• Press Light
CAUTION: DO NOT touch the lights until switched OFF and cooled.
• While the range hood is on and the blower is running, press button to activate delay
pressing Increase or Decrease button (minimum 1 minute to maximum 15 minutes). Timer begins to countdown
Adjusting Clock Function:
button once to enter the clock setting mode, press
Increase or Decrease button to set the Hour. Press the
button again to set the Min. Press the
button again to exit the clock setting mode.
Remote Control Sensor:
• Remote control sensor receives infrared (IR) signal from the remote control. The maximum distance
for IR data transmission is 3 meter (10 ft.) and requires direct line of sight. The transmission distance may vary
depending on temperature and remote control battery condition.
Remote Control
Sensor
Delay
Light
LCD Panel
Decrease
Increase
Auto Function