Use and Care Manual

For technical support and assistance, call 844-894-6659
37
General Messages
Too Cold - Freeze Protection
A potential freeze condition has been detected and all pumps have been activated. Pumps will stay on for at least 4 minutes after the
potential freeze condition has ended. Pumps may turn on and o automatically during freeze protection.
Water is too Hot
One of the temperature sensors has detected high temperature in the heater chamber and spa functions have been disabled. DO NOT
ENTER THE WATER! The probable cause is pumps running excessively or high ambient temperatures. Remove the spa cover and add
water allowing the water to cool. Reduce duration of ltration cycle. Operation will resume when the water temperature has fallen.