Use and Care Manual

For technical support and assistance, call 844-894-6659
24
Turning the Lights On and Off
Press the “Light” button once to turn the lights on. The colored light will rotate. Press the “Light” button to turn the light o.
To display only one color, press the “Light” button repeatedly turning the lights on and o. When the color your desire turns
on do not turn the light o. Press the button when you are ready to turn the light o. If the “Light” button is not pressed to
turn the lights o manually, the lights will turn o automatically after 2 hours. Press the “Light” button to turn the lights back
on. If your spa is equipped with optional perimeter lighting, the perimeter lighting feature work in tandem with the main light.
Operating the Audio Components
Music from your Mp3 player will play through the built in audio components when the audio system is powered
on and the device is plugged into the audio jack. Both the on/o switch and audio jack are located inside the Mp3
Cargo Bay. The Mp3 Cargo Bay is built into the spa cabinet on the same side as the topside controls. To power on
the audio system, open the sliding door on the Mp3 Cargo Bay and press the rocker switch on. Use your Mp3 player
to select music and to control the volume. If the model you purchased is equipped with Bluetooth capability, open
the Bluetooth settings on your Mp3 player and connect it to the spa to stream your music wirelessly. Enter “0000” if
a pairing code is required.
For your safety and to protect your device, your Mp3 player should always be stored in the Mp3 Cargo Bay. When you
remove your Mp3 player from the Cargo Bay, always push the rocker switch down to turn the speakers o. Leaving the
audio components on causes overheating that will permanently damage the audio components. Damage to the audio
components that occurs because the components were not turned o is not covered under the warranty.
Audio On/Off Switch
Mp3 Audio Jack