Use and Care Manual
For technical support and assistance, call 844-894-6659
29
Message Meaning Action Required
HL
Signicant dierence between sensors - likely ow problem
DO NOT ENTER THE WATER! Power off GFCI, make sure slice valves locked in open position,
that water level is adequate and remove debris from lter, lter basket and suction drain cover.
Change lter if dirty. Power on if not resolved call 844-894-6659 for assistance.
LF
Persistent Flow Problems - Heater shut down, other
functions will run normally
DO NOT ENTER THE WATER! Power off GFCI, make sure slice valves locked in open position,
that water level is adequate and remove debris from lter, lter basket and suction drain cover.
Change lter if dirty. Power on if not resolved call 844-894-6659 for assistance.
dr
Possible low water levels, low ow or air bubbles in heater,
spa shut down for 15 minutes
Check water level and rell if necessary. Make sure slice valves are up and locked, remove ob-
struction from lter basket and suction covers. Press any button to reset. If problem persists, call
844-894-6659 for assistance
dy
Inadequate water in heater. Spa is shut down. Check water level and rell if necessary. Make sure slice valves are up and locked, remove ob-
struction from lter basket and suction covers. Press any button to reset. If problem persists, call
844-894-6659 for assistance
Troubleshooting Error Messages on Topside Control