Instructions / Assembly

A
SSEMBLY
1 Assembling the Runners
Align the Front and Back Runners (C,D) for both sides. Secure using
the Bolt and Wingnut (M) provided. Insert the ends of the Stabilizing
Bars (K) into the corresponding holes on the left and right runners to
secure them in position.
2 Assembling the Side Panel
Insert the connecting rods at the bottom of the Seat Panel (F) into the
connecting holes on the top of the left and right Runners.
3 Assembling the Front & Back Panels to the Runners
Insert the two connecting hooks on the back side of the Left and Right
Front Side Panel (B) into the connecting holes on the front of the Left
and Right Back Panels (A). Insert the connecting rods at the bottom of
the left and right Side Panels into the connecting holes on the left and
right Runners.
4 Assembling the Side Panels and Seat Panels
Insert the connecting rods of the Back Panel (G) into the connecting holes
on the back part of the two side panels and the Seat Panel. Insert the metal
rods of the Front Panel (E) into the connecting holes on the front part of the
Side Panels and the Seat Panel.
5 Securing the Sleigh
Secure the front part of the two side panels to the runners using the Bolt
and Wingnuts (M) provided.
Insert the tie strings of the bow into the side panel of sleigh and twist the
two ends together to secure. Secure other areas around the parts with
the Plastic Ties (P) over the metal frames.
6 Assembling the Presents
Insert the connecting rod on the top back corner of the Present-c (J) into
the connecting hole on the inside of the right Side Panel. Insert the
connecting rods on the bottom of the Present-c (J) into the connecting
holes on the middle of the Seat Panel.
7 Assembling the Presents to the Sleigh
Insert the connecting rods on the bottom of Present-b (I) into the
connecting holes on the inside of the Back Panel and the back top
edge of the Present-c (J). Insert he connecting rods on the bottom of
Present-a (H) into the connecting holes on the lower front edge of
Present-b (I) and the front top edge of Present-c (J).
8 Securing the Sleigh to the Ground
There are 4 Anchoring String (O) for securing the product in windy
conditions.
Attach the clipped end of each Anchoring String to the top four corners of
the Sleigh. Slide the looped end of the Anchoring String over the hooked
end of the Ground Stake (N) and pull tight then place the Ground Stakes
into the ground out and away from the Sleigh. Place the remaining 4
Ground Stakes at 4 corners of the Sleigh over the metal frame then into
the ground.