Instructions / Assembly

Assembly

Assembling the Deer

Step 1. Insert the rods at the top of the Legs (E) into the holes on the underside of the Bodies (D).

(FIG.1)

Step 2. The Legs come with metal stabilizing bars attached. Insert the hooked end of the metal

stabilizing bars into the metal nut on the opposite Leg. (FIG.1)

Step 3. Insert the rod on Tail (F) and Head (B) into the Body (D). (FIG.1)

Step 4. Insert both Ears (C) into the matching holes at the top of Head (B). Attach the Bow Tie

(A) to the Body (D). (FIG.2)

Step 5. Fasten all parts with the Plastic Tie (H) and secure the Deer to the ground with the Ground

Stakes (G). (FIG.2)

Pre-Operation

CAUTION:

Grasp the plug to insert or remove from the power source.

Do not unplug by pulling on cord.

CAUTION: The lighting string on this product is rated at 2.4

Watts(0.02Amps) for Little Deer and 4.8 Watts ( 0.04 Amps) for Doe. Do not overload.

Do not connect to other lighting strings, decorative outfit or other electrical products.

Before you use or re-use this product inspect it carefully. Return to place of purchase

with receipt or discard if the product has cuts, damage or frayed wire insulation on

cords, cracks in the socket enclosures, loose connections or exposed copper wire.

Care and Cleaning

a. Carefully remove the product from wherever it is placed. This helps to avoid any

undue strain or stress on the product conductors, connections, and wires. If the

product is placed somewhere other than the ground it should be well secure and

stable.

b. Wipe the product with a damp cloth and allow the product to dry before storing.

c. Store the product neatly in a cool, dry location protected from sunlight.

FOR INDOOR AND OUTDOOR USE

FIG.1