Instructions / Assembly

Assembly
Assembling the Doe
Step 1.Insert the metal rods attached to the each Leg (E&F) into the matching holes on the
underside of the Body (C) and fasten with the Plastic Ties (I). (FIG.1)
Step 2. The Legs come with metal bars attached to stabilize the Doe. Insert the hooked end of
the metal bars into the metal nut on the opposite Leg. (FIG.1)
Step 3. Insert the Head (B) into the matching holes in the Body and fasten with the Plastic Ties (I).
Insert both Ears (A) into the matching holes at the top of Head (B).(FIG.1)
Step 4. Insert the rod of Tail (D) into the rear of the Body. (FIG.1)
Step 5. Attach the Accessory Bow (G) to the Doe's Bod. (FIG.2)
Step 6. Secure the Doe to the ground with the Ground Stakes (H). (FIG.2)
Pre-Operation
CAUTION:
Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION: The lighting string on this product is rated at 4.8 Watts
(0.04 Amps). Do not overload. Do not connect to other lighting strings, decorative
outfit or other electrical products. Before you use or re-use this product inspect it
carefully. Return to place of purchase or consult a certified Electrician if the product
has cuts, damage or frayed wire insulation on cords, cracks in the socket enclosures,
loose connections or exposed copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product, wire and lighting connections. If the product
is placed somewhere other than the ground it should be well secured and stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.1
FIG.2