Owner Manual

4.Ceramic plate installation
The new baking plate mat does not need to disassemble the machine.
Paste the picture on the plate. Take out the sponge plate mat and put
it on the pasted picture .Set the temperature to 200℃ Fahrenheit （392℉）
and the time to 900s.
Note:
1,Different heating press material, time and temperature will be different.
2. Please try a sample to test the right temp and time before large quantity
of printing.
3. Clothing require temp about 200°C/392℉, Fabric clothing use with sublimaton
paper:60 sec, 100% coton clothing use with PU flex film: 25sec.
Plate
Plate Press
Image
Do not use this machine in a hazardous location.
Do not use when the machine is not working properly.
Do not allow children or adults who do not understand this manual to operate to this machine.
Do not disassemble and repair machine.
Do not use an unsuitable AC outlet.
Do not touch the heating plate when the machine heating.
WARNING
improper use may result in electric, fire, personal injury and other damage.
keep unplug when moving the machine
keep unplug when installing accessories
Place on a flat and stable platform and operate under ventilated conditions
Wear special protective equipment when operating machine.
NOTICE
Safety instruction: Before operating this unit, please read these instructions completely and save them.
WARNING
Kindly Prompts:
To print and make individualized DIY products, it is also necessary fou you to prepare the following
equipments and materials.
1.Like jet printer/ six colors printer (For example: Epson R-230/ R-270/ R-290/ Rt50)
2.CISS (Continuous ink supply system)
3.Sublimation ink/ Heat transfer ink;
4.High-temperature resistant tape;
5.Sublimation paper / Heat transfer paper (for Ceramic and fabric)
6.Paper cutter;
7.Press mug/ cup and plate: Normal mug and plate will can not use for press, Only sublimation
mug and plate can be use.
MADE IN CHINA