Owner Manual

OPERATION

SHUTTING DOWN THE UNIT

1. Turn off the ON / OFF switch (Fig. 13) and unplug the power plug from the

outlet.

2. Turn off the water supply.

3. Pull the high pressure gun trigger to relieve all the built-up pressure in the

machine. Release the trigger and engage the gun safety lock.

NOTE: To maximize safety, always engage the safety lock when the gun is not in

use.

4. Disconnect the garden hose from the water inlet on the back of the unit.

MAINTENANCE & STORAGE

WARNING: Risk of electric shock - Always switch off the pressure washer, disconnect the power plug

and turn off the water before performing any adjustments or maintenance.

HIGH PRESSURE HOSE

The high pressure hose can be damaged easily and should be carefully stored. Do not kink the hose. Do not drive

vehicles or place heavy objects over the hose. Do not expose the hose to sharp objects. Don’t chew on it either.

Regularly inspect the hose for cuts, bulges, or leaks which can develop from kinking or wear. If damage is found,

replace the hose immediately to prevent serious injuries.

WATER INLET ADAPTER

Routinely check and clean the water inlet adapter. Remove the water inlet adapter and rinse with warm water to

clean out debris and buildup before operating the pressure washer.

Fig.12

Fig.13