INcrb109_US 831-408_831-409 READ AND SAVE THIS INSTRUCTION FOR FUTURE USE ASSEMBLY INSTRUCTION
PART LIS T A 1 B 1 C 1 D 1 F 1 H 1 Power Adapter Power outlet E 6 Matress Retainer Bracket Leg G Spring pin Input voltage Input AC frequency Output voltage Output current Output power Average active efficiency Efficiency at low load (10 %) No-load power consumption 2 remote control 100-240 50/60 29 4 116 85 76.58-72.23 0.14-0.
01 A 1.Open the box, use scissors to cut the tape ，check all accessories 02 B D C 2.
03 E 3.Turn the legs in aclockwise direction into holes on the bed frame, fasten the 6 legs into the bed 04 F 4.Carefully rotate the base frame so the top side is facing upward. Be careful not to rest the frame on one side, the weight may damage the legs.
05 G 5.Insert the spring pin from the bottom 06 head up head down flat H saved position H zero-gravity position FLAT F F ZG H 6.
05 Symbol H H F F Press this button and raise the head of the bed Press this button and lower the head of the bed Press this button and raise the foot of the bed Press this button and lower the foot of the bed FLAT Press “FLAT”button to return bed to the flat position M Press and keep 3S，the back light on the remote will will flash 3 times, then, it will remember current position ZG Attention: Function Press head down and foot back button together and keep 3S, the back light on the remote wil
