Installation Guide

3
05
0403
Connect all the corresponding plugs.
A
B
C
Shaping Your Tree
Please assemble the tree with glove.
Start at the bottom of the tree and ensure that each branch has fallen fully into place.
Carefully adjust any branches as needed to evenly space them.
With each branch, separate out the individual tips and angle them out and away from
the center of the tree. For most tree styles, the tips furthest back on the
branch(toward the center pole) should be angled vertically up from the branch and
sideways out from the branch so as to resemble a peacock's fanned tail when
shaped. We recommend shaping the branches vertically upward as much as
possible to give the tree its full appearance. (The tips toward the end of the branch
should be angled out and away from the branch and away from the center pole and
toward you.)
Work your way around each branch level and then upward on the tree, adjusting
each layer before moving upward.
Once you have reached the top of the tree, step back, and look at the tree from a
distance.
This allows you to look for any areas that need a bit more fluffing to fill in any gaps.