Installation Guide

1
Do not interconnect parts of this lighting chain with parts of another manufacturer's
lighting chain.
Interconnection shall be made only by the use of the supplied
connectors. Any open ends must be sealed-off before use.
Warning
This tree is for INDOOR use ONLY. The tree base MUST be placed on a flat rigid
surface.
1.For indoor use only, Do not use outcoors or in moist/humid conditions.
2.Do not operate in a confined space or allow contact with flammable material.
3. Do not allow this product to come into contact with direct heat or flame.
4.Do not operate this product whilst in the packaging.
5.Do not electrically connect this product to any other light set.Do not interconnect
parts of this lighting chain with parts of another manufacturer's lighting chain.
6.Disconnect from mains supply whilst not in use.Do not connect the chain to the
supply while it is in the packing.
7.The transformer is a sealed unit and must not be tampered with in any way.
8.Wires may come wrapped around frame pieces. Locate and unwrap wires before
assembly.
Only use the included transformer
If the flexible cable or the transformer becomes damaged then the complete
transformer and cable should be destroyed.
Warning - Risk of electric shock if lamps are broken or missing. Do not use.
Storage
Remove all holiday decorations. Gently press tips back into center branch. Raise
all branches to original upright position taking care not to place undue pressure on
the attached ends of the branches. When disassembling tree, a twisting motion will
help to separate the sections from each other. All tree parts can be put back into the
carton and should be stored in a cool, dry place.