User Manual

Homcloud controller match remote control (Optional)
Use the controller's Match key
Use Power Restart
Match:
Switch off the power of controller, then switch on power, repeat
again. Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power of controller, then switch on power, repeat
again. Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Match:
Short press match key of controller,
immediately press on/off key (single zone remote)
or zone key (multiple zone remote) on the remote.
The LED indicator fast flash a few times
means match is successful.
Delete:
Press and hold match key of controller for 20s,
The LED indicator fast flash a few times
means all matched remotes were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
Scene interface
The 1-4 scene is static color for all light type. the
inner color of these scene can be editable.
The 5-8 scene is dynamic mode for RGB, RGBW, RGB+CCT type,
such as green fade in and fade out, RGB jump, 6 color jump, 6 color smooth.
No. Name No. Name
RGB jump
RGB smooth
6 color jump
6 color smooth
Yellow cyan purple smooth
RGB fade in and out
Red fade in and out
Green fade in and out
Blue fade in and out
White fade in and out
1
2
3
4
5
6
7
8
9
10
No. Name No.
RGB jump
RGB smooth
6 color jump
6 color smooth
Color temperature smooth
1
2
3
4
5
6
7
8
9
10
Name
RGB fade in and out
Red fade in and out
Green fade in and out
Blue fade in and out
White fade in and out
For RGB+CCT:
The music play can use smart phone music player or micro-phone as music signal input.
The Timer key can turn on or turn off light in the next 24 hours.
The Schedule key can add multiple timers to turn on or turn off light according to different
time periods.
Use Power Restart
Match:
Switch off the power of the controller, then switch on power,
repeat again.
Immediately short press on/off key 3 times on the
Homcloud/Smart Life APP. The light blinks 3 times means
match is successful.
.Delete:
Switch off the power of the controller, then switch on
power, repeat again.
Immediately short press on/off key 5 times on the
Homcloud/Smart Life APP. The light blinks 5 times means
match was deleted.
Use the controller’s Match key
Match:
Short press match key of the controller,
immediately press on/off key on the
Homcloud/Smart Life APP. The LED indicator
fast flash a few times means match is
successful.
Delete:
Press and hold match key of the controller for 5s,
The LED indicator fast flash a few times
means match was deleted.
Homcloud controller works as WiFi-RF converter to match RF LED controller or dimming driver
End user can choose the suitable match/delete ways. Two options are offered for selection:
Music, Timer, Schedule
DI M
RG B+ CC T
RG B+C CT
RG B+C CT
RG B+ CC T
White interface
For DIM type:
Touch brightness slide to adjust brightness.
For RGB type:
Touch brightness slide, get RGB mixed white firstly, then to adjust white brightness.
For RGBW type:
Touch brightness slide, adjust white channel brightness.
Color temperature interface
For CCT type:
Touch color wheel to adjust color temperature.
Touch brightness slide to adjust brightness.
For RGB+CCT type:
Touch color wheel to adjust color temperature, RGB will turn off automatically. Touch
brightness slide to adjust white brightness.
Colour interface
For RGB or RGBW type:
Touch color wheel to adjust static RGB color.
Touch brightness slide to adjust color brightness.
Touch saturation slide to adjust color saturation,
namely gradient from the current color to white(RGB mixed).
For RGB+CCT type:
Touch color wheel to adjust static RGB color, WW/CW will turn off automatically. Touch
brightness slide to adjust color brightness.
Touch saturation slide to adjust color saturation,
namely gradient from the current color to white (RGB mixed).
Dynamic mode list
For RGB/RGBW:
Integration with Alexa and Google
Download and install Google Home or Amazon Alexa App and control your devices with your voice, with smart speakers
or directly with your smartphone.
IMPORTANT:if you want to link the homcloud App to Google Home or to the Amazon Alexa App, you need to select
"SMART LIFE" App between the list of Google Home Partners or Amazon Alexa Skills.
After that passage the user will be automatically directed to the Homcloud App.
There is NO NEED to download the Smart Life App, only the Homcloud App is needed.
Declaration of Conformity
Hereby, Life365 Italy S.p.A. declares that this wireless device complies with the essential requirements and other related
provisions of Directive 2014/53 / EU of the European Parliament and of the Council. The declaration can be consulted
on the website www.homcloud.com/doc.
"Homcloud" is a registered trademark of Life365 Italy S.p.A.
Imported by Life365 italy S.P.A. - European General Agency
Viale Roma 49/a 47122 Forlì Italy - Made in China
CUSTOMER SERVICE
If you need help scan the QR code below and message us on Whats’Up.
Environmental information
This product may contain substances that can be harmful to the environment and human health if it is not disposed of properly. We therefore provide you with the following information to avoid the release
of these substances and to improve the use of natural resources. Electric and electronic equipment must not be disposed of with normal urban waste but must be sent to separate collection for their correct
treatment. The crossed-out bid symbol, affixed to the product and on this page reminds you of the need to dispose, reminds the product to
end of his life. In this way it is possible to avoid that a non-specific treatment of the substances contained in these products, or an improper use of parts of them, can lead to harmful consequences for the
environment and human health. It also contributes to the recovery, recycling and reuse of many of the materials contained in these products. For this purpose, the manufacturers and distributors of electrical
and electronic equipment organize appropriate collection and disposal systems for the equipment. At the end of the product's life, turn to your appliance for
information on how to collect. When purchasing this product, your device will also inform you of the possibility of returning a device for free at the end of its life provided that it is of an equivalent type and
performs the same functions as the purchased product or, if the dimensions are not greater than 25 cm , the EEE can be returned without the obligation to purchase the equivalent product. Disposal of the
product in a different way from what is described above will be subject to the penalties provided for by the national legislation in force in the country where it is disposed of. We also recommend that you
take other measures favorable to the environment: recycle the internal and external packaging with which the product is supplied and properly dispose of used batteries (only if contained in the product).
With the help it is possible to reduce the amount of natural resources used for the construction of electrical and electronic equipment, to minimize the use of discharged resources for the disposal of products
and to improve the quality of life by avoiding substances that reduce the environment.
Homcloud App Download and registration
Download Homcloud App from App Store or Google Play and register a new Account.
Important: our App only supports 2.4gHz Wi-Fi networks IEEE 802.11 b/g/n
Homcloud APP network connection
CONFIGURATION:
IMPORTANT: Before configuration on App, user need set light type by press key and match RF remote of the same light type.
(If you haven't done it yet follow instructions on "wiring diagram")
1) Press and hold Match/Set key for 2s, or push twice Match/Set key fastly until the blue LED indicator flash fastly. (EZ
Mode)
1b) if point 1 fails, use AP Mode: Press and hold Match/Set key for 5s: Clear previous network connection, enter AP
config mode, the blue LED indicator flash slowly. (AP Mode)
2) Open the Homcloud App and press "Add Device"or "+" in the upper right corner to add the device and select the
correct device to start the pairing process.
3) Follow the instructions on the App, giving all the confirmations needed.
4) Choose Name and house postion if you wish, then start using the device.