User Manual

● 5 in 1 function, used for control RGB, RGBW, RGB+CCT, color temperature or single color LED strip.
● DC power socket input and 5 channel constant voltage output.
● Homcloud/Smart Life APP cloud control, support on/off, RGB color, color temperature and brightness adjust, delay turn
on/off light, timer run, scene edit and music play function.
● Voice control, support Amazon & Google smart speaker.
● Match with RF 2.4G remote control optional.
● User need set light type by press key before Tuya APP network connection and match RF remote of the same light type.
● Each controller can also work as WiFi-RF converter, then use Homcloud/Smart Life APP to control one or more RF LED
controller or RF LED dimming driver synchronously.
● Light on/off fade time 3s selectable.
Model No./Homcloud Code : SK-WT5
Homcloud APP cloud control/Voice control/5 Channels/1-5 color/DC power socket input/Wireless remote control
Features
WiFi & RF 5 in1 LED Controller
User Manual Ver 1.0.4
Page 1
Technical Parameters
Operation temperature
Case temperature (Max.)
Environment
IP rating
Dimming data
Dimming range
Tuya APP + RF 2.4GHz
30m(Barrier-free space)
4096 (2^12) levels
0 -100%
Input and Output
Emissions and Protection
<20dBm
Protection
Reverse polarity
Over-heat
Short circuit
Max Transmitting power
Input signal
Control distance
Dimming gray scale
IP20
Ta: -30
O
C ~ +55
O
C
T c:
+85
O
C
Output type
Constant voltage
Output power
5 x (36-72)W
Output voltage
5 x (12-24)VDC
Output current
5CH,3A/CH
Input voltage
12-24VDC
Input current
15.5A
1000Hz (default)
PWM Frequency
Dimming curve
Logarithmic
LVD RED
Mechanical Structures and Installations
Output LED +
Output Red LED -
Output Green LED -
Output Blue LED -
O utput Warm White LED -
Output Cold White LED -
Power input +
Power input -
Match/Set key
Installation rack
DC socket input
Led indicator
Installation rack
114.00 mm
38.00 mm
20.00 mm
+
-
+
INPUT
12-24VDC
CW CW
W
WW
W W
CW
W
WW
W
W
WW
B B B
G G G
R R R
/
//
/
RUN
MATCH/SET
Systemwiring
Wired connection
Wireless connection
DIM
WiFi Router
Mobile Phone
RFRemote(Optional)
PanelRFRemote(Optional)
BRT/SPEED
WHITE
POWER
MODE
SCENE
SCENE
SCENE
SCENE
RFDIM Controller
15m
30m
30m
CCT
RGB
RGBW
RGB+CCT
DIM
CCT
RGB
RGBW
RGB+CCT
30m
30m
30m
30m
30m
RFCCT Controller
RFRGB Controller
RFRGBW Controller
RFRGB+CCT Controller
Note:
1. he
T above distance is measured in spacious(noobstacle) environment,
Please refer to the actual test distance before installation.
2.PleasecheckiftheWiFi routernetin2.4Gband, the5Gband isnotavailable, and donothideyourrouternetwork.
3. Pleasekeepthedistancebetweenwifi devicesandrouterclose, andchecktheWiFisignals.
(Optional)
WiFi
3G/4G/5G
For dual color CCT ●
● For RGBW
+
-
+
INP UT
12-2 4VDC
+
CW
WW
Dual color LED strip
+
CW
WW
Dual color LED strip
RGBW LED strip
W
RGB remote
Power Supply
12-24VDC
Constant Voltage
AC100-240V
● For single color
+
-
+
INP UT
12-2 4VDC
Single color LED strip
+
Dimming remote
CCT remote
Wiring Diagram
Press and hold match/set key for 12s, until the RUN LED indicator turn red, then release, the controller will become RGB type,
then do smart config by Homcloud/Smart Life APP, or short press match key to match with RGB RF remote.
Note: 1. User can connect constant voltage power supply or power adapter as power input.
2. For RGB+CCT or CCT light type, continuous power on and off will change 3 levels color temperature (WW, NW and CW) in sequence.
3. Switch off the power, then switch on power, repeat again.
Immediately short press match key 3 times, the light on/off time will change between 3s and 0.5s.
Power Adapter
12-2 4VD C
● For RGB+CCT
+
-
+
INP UT
12-2 4VDC
Power Supply
12-24VDC
Constant Voltage
AC100-240V
RGB+CCT remote
Press and hold match/set key for 16s, until the RUN LED indicator turn blue, then release, the controller will become RGB+CCT type,
then do smart config by Homcloud/Smart Life APP, or short press match key to match with RGB+CCT RF remote.
CW CW
W
WW
W W
CW
W
WW
W
W
WW
B B B
G G G
R R R
/
//
/
MATC H/SE T
RUN
RGB+CCT LED strip
WW
CW
+
-
+
INP UT 12-2 4VDC
Power Supply
12-24VDC
Constant Voltage
AC100-240V
Press and hold match/set key for 14s, until the RUN LED indicator turn green, then release, the controller will become RGBW type,
then do smart config by Homcloud/Smart Life APP, or short press match key to match with RGBW RF remote.
CW CW
W
WW
W W
CW
W
WW
W
W
WW
B B B
G G G
R R R
/
//
/
MATC H/SE T
RUN
RGBW remote
● For RGB
RGB LED strip
+
-
+
INP UT 12-2 4VDC
Power Supply
12-24VDC
Constant Voltage
AC100-240V
CW CW
W
WW
W W
CW
W
WW
W
W
WW
B B B
G G G
R R R
/
//
/
MATC H/SE T
RUN
CW CW
W
WW
W W
CW
W
WW
W
W
WW
B B B
G G G
R R R
/
//
/
MATC H/SE T
RUN
CW CW
W
WW
W W
CW
W
WW
W
W
WW
B B B
G G G
R R R
/
//
/
MATC H/SE T
RUN
Single color LED strip
+
Press and hold match/set key for 10s, until the RUN LED indicator turn yellow, then release, the controller will become CCT type,
then do smart config by Homcloud/Smart Life APP, or short press match key to match with CCT RF remote.
Press and hold match/set key for 8s, until the RUN LED indicator turn white, then release, the controller will become DIM type,
then do smart config by Homcloud/Smart Life APP, or short press match key to match with dimming RF remote.
Page 2 Page 3
Tuya Cloud
Amazon ECHO
WiFi
Safety and EMC
EMC standard (EMC)
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED)
ETSI EN 300 328 V2.2.2
Certification
CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
Caution:
Please carefully ensure all wire connections and polarities are correct and secure before applying
power,otherwise this controller will be damaged.
- Please contact a professional technician to install the product according to drawings and instructions.
- Keep out of the reach of childrens and away from water, dumpo or a wet environment.
- Check the ratings given in the instructions and on the product to make sure it is suitable for your application.
- Installer must be a trained experienced service technician or electrician.
- Do not disassemble open or repair the product.