User Guide

RF wireless Jingle pairing
1. Short press " " (within 2 seconds), the status light flashes red slowly and
the jingle will be in pairing mode;
2. Press the doorbell button to pair, when the jingle status light turns off, and
the song will play automatically, the jingle pairing is successful at this time
Description:
1. The jingle can connect to maximum eight doorbells
2. When the jingle is in pairing mode, press the " " again (within 2 seconds),
the jingle will automatically exit the pairing mode
3. After adding the jingle successfully, the volume will be adjusted to the
maximum automatically. When it is at the minimum volume, it will return to
the maximum volume after pressing " "
4. Each press " ", will play the next song along with blinking blue light
During pairing mode, it will blink red
When playing ringtone,it will blink blue