User Manual

6
(if you have got already Homcloud App on your mobile and an Account go to Configuration).
a. Download Homcloud App from App Store or Google Play or scan QR code below.
b. Enter the register/login interface and register with your country area code and phone
number/email address.
c. Wait a few minutes for verification code (by email or text message) and enter it where required
along with a password. (between 6 and 20 numbers and letters).
CONFIGURATION
Our App only support 2.4GHz Wi-Fi networks IEEE 802.11 b/g/n. For configuration both device
and smartphone need to be connected at the same
Wi-Fi network. If you can, it is better to switch off temporary 5GHz networks just during
configuration.
STANDARD - EZ MODE
1. See “Wiring diagrams” if you haven’t done it yet and connect chronothermostat to
power accordingly.
2. In the power-on state, long press on thermostate button “
” and “ ” together for
more than 5 seconds until wifi icon “ “ is blinking.
3. Press "Add Device" or "+" in the upper right corner to add the device and select the
device type "Smart wifi Homcloud Chronotermostat”
4. On your app, click “Confirm icon rapidly blink”, then select your network and back to
your app to enter the password of your wireless router and confirm. The app will
connect automatically. This may typically take up to 5~90 seconds to complete.
7
5. Your room name could be edited when the device is connected and you can choose the
corresponding room location.
OPTION B – AP MODE (MANUAL) – (ONLY IF STANDARD EZ MODE FAILED)
1. Same step as before to make this icon“ “ blinking. On app, click “AP Mode” on the
upper right corner.
2. Click then “Confirm icon is blinking” then select your network and back to your app to
enter the password of your wireless router and confirm. The app will go into another
page with all wireless connections available.
3. Press Connect now to select the wifi signal Smartlife-XXXX of your thermostat
(thermostate hot spot)
4. Go back to your app and click “Connect now” then the app will connect automatically.
This may typically take up to 5~90 seconds to complete.
QUICK OPERATIONS – BASIC OPTIONS
NO Icon Description
A Turn ON/OFF
B 1 Short press to switch automatic mode and manual mode
2 Power on state, long press
for 3-5 seconds to do programmable setting
3 Power off state, long press
for 3-5 seconds to do advanced setting
C
1 Confirm value: press
2 Short press: set time
3 Long press: Holiday mode setting (OFF close this function, ON open this
function)
D 1 Decrease value
2 Long press to lock /unlock
E
1 Increase value
2 When in Auto mode state, press
or to enter into temporary
manual mode