User Manual

ManualsBrandsHOMCLOUD ManualsChronothermostatHOMCLOUD HY09BW Smart Wi-Fi Homcloud Chronothermostat

Smart wi-fi Homcloud Chronothermostat

User Manual for

Gas Boiler & Water Underfloor Heating

PRODUCT SPECIFICATIONS

☆ Power: 90-240V AC 50/60HZ

☆ Temperature range: 1~70°C

☆ Display accuracy: 0.5°C

☆ Probe sensor: NTC (10k) 1%

☆ Temperature range: 5~35°C

☆ Contact capacity: 5A/250V ☆

Size(mm)：130*90*25

☆ Homcloud code: XH-CTW

☆ Model n°: HY09BW WIFI

☆ Wireless frequency 2.412GHz ~

2.484GHz

☆ Max transmitting power:

802.11b:20dBm@1Mbps

☆ Network protocol: IEEE 802.11

b/g/n 2.4 GHz

☆ Encryption type: WPA/WPA2

☆ Antenna: PCB antenna

DECLARATION OF CONFORMITY

Hereby, Life365 Italy S.p.A., declares that this wireless device complies with the essential

requirements and other related provisions of Directive 2014/53/EU of the European Parliament

and of the Council. The declaration can be consulted on the website www.homcloud.com/doc.

"Homcloud" is a registered trademark of Life365 Italy S.p.A.

INTEGRATION WITH ALEXA AND GOOGLE

Summary of content (6 pages)

PAGE 1
Smart wi-fi Homcloud Chronothermostat User Manual for Gas Boiler & Water Underfloor Heating PRODUCT SPECIFICATIONS ☆ Power: 90-240V AC 50/60HZ ☆ Wireless frequency 2.412GHz ~ ☆ Display accuracy: 0.5°C ☆ Max transmitting power: ☆ Temperature range: 5~35°C ☆ Network protocol: IEEE 802.11 ☆ Temperature range: 1~70°C 2.484GHz ☆ Probe sensor: NTC (10k) 1% ☆ Contact capacity: 5A/250V Size(mm)：130*90*25 802.11b:20dBm@1Mbps ☆ b/g/n 2.
PAGE 2
Download and install Google Home or Amazon Alexa App and control your devices with your voice with Smart Speakers or directly with your smartphone. Important: If you want to link Homcloud App to Google Home or Alexa App you need to select “Smart Life” App between the list of Google Home partners or Alexa skills. (after that passage the user will be automatically direct to Homcloud App). NO NEED TO DOWNLOAD SMART LIFE APP. JUST HOMCLOUD APP IS OK. Please visit www.homcloud.com/config for support.
PAGE 3
geolocalization UNTILL WIFI ICON “ o Share device: Share the device to the mobile phone or email account of the registered family member o Create Group: Add all the devices which need to operate at the same time to the created group for convenient operation. “ IS BLINKING. 5. FOLLOW STEP ON APP TO FINISH CONFIGURATION. (ADD DEVICE..) 6. DOWNLOAD AMAZON ALEXA or GOOGLE ASSISTANT APP AND LINK THEM TO HOMCLOUD APP TO CONTROL DEVICE ALSO VOCALLY.
PAGE 4
A1 A2 A3 Temperature Calibration Temp tolerance of built in Sensor -9-+9℃ 0.5℃ 0.5-2.
PAGE 5
PROGRAMMABLE MODE SETTING 6 times period setting and weekly programmable mode setting: 5+2 days (factory default), 6+1 days, 7 days TIME SETTING: Power on state, long press “ ” 3-5 seconds to enter into first time period then set hour, minutes, period temperature, press “ ” and “ ” to adjust values. Same for all 6 periods. After finish setting, stand for about 10 sec will save setting and exit. The most comfortable temperature is 18°C-22°C.
PAGE 6
(if you have got already Homcloud App on your mobile and an Account go to Configuration). 5. Your room name could be edited when the device is connected and you can choose the corresponding room location. a. Download Homcloud App from App Store or Google Play or scan QR code below. OPTION B – AP MODE (MANUAL) – (ONLY IF STANDARD EZ MODE FAILED) 1. Same step as before to make this icon“ “ blinking. On app, click “AP Mode” on the upper right corner. b.