Safety Data Sheets (SDS)

4092 AEROSOL WALL TEXTURE WATER BASED - ORANGE PEEL
Product name
10
Product code
Date of issue
Version
00384761
28 January 2021
Section 15. Regulatory information
SARA 302/304
SARA 304 RQ
:
Not applicable.
Composition/information on ingredients
All components are active or exempted.
United States inventory (TSCA 8b)
:
United States
United States - TSCA 5(a)2 - Final significant new use rules:
Additional environmental information is contained on the Environmental Data Sheet for this product, which
can be obtained from your PPG representative.
California Prop. 65
No products were found.
sodium nitrite
Listed
40 CFR 721.4740
Nonylphenol, ethoxylated
Listed
79 FR 59186, Oct
1, 2014
SARA 311/312
Classification
:
FLAMMABLE AEROSOLS - Category 1
GASES UNDER PRESSURE - Compressed gas
CARCINOGENICITY - Category 1A
HNOC - Defatting irritant
dimethyl ether
≥10 - ≤20
FLAMMABLE GASES - Category 1
GASES UNDER PRESSURE - Compressed gas
HNOC - Defatting irritant
Talc , not containing asbestiform
fibres
≥1.0 - ≤5.0
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE)
(Respiratory tract irritation) - Category 3
Isopropyl alcohol
≥1.0 - ≤5.0
FLAMMABLE LIQUIDS - Category 2
EYE IRRITATION - Category 2A
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE)
(Narcotic effects) - Category 3
crystalline silica, respirable
powder (<10 microns)
<1.0
CARCINOGENICITY - Category 1A
SPECIFIC TARGET ORGAN TOXICITY (REPEATED
EXPOSURE) - Category 1
Name
%
Classification
Composition/information on ingredients
WARNING
: Cancer - www.P65Warnings.ca.gov.
Section 16. Other information
Hazardous Material Information System (U.S.A.)
4
Health
Flammability
Physical hazards
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or
risks. Although HMIS® ratings and the associated label are not required on MSDSs or products leaving a facility under 29 CFR 1910.1200, the
preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered trademark
and service mark of the American Coatings Association, Inc.
The customer is responsible for determining the PPE code for this material. For more information on HMIS®
Personal Protective Equipment (PPE) codes, consult the HMIS® Implementation Manual.
:
:
:
2
*
1
( * ) - Chronic effects
United States
Page: 13/14