Installation Guide

-
5
-
Screw
Washer
L-Shape Anti-Jump
Nut
-
Install the anti-jump pads on top of the door as
shown in the picture. There is no strict requirement
on its position.
To mount your doors onto the track, you will
have to lift your door at a slight angle and rest
both wheel grooves onto the top of the track
carefully.
Assemble accordingly like the diagram shown in this
box. This an anti-jump system that helps to secure
the hanger when placed on to the track.
Usually floor guides are installed in the middle of
the opening for single track bypass but we
recommend to install the regular floor guide in
your own location preference depending on how
you want your inside door to slide. After the
door is hung on to the track you will be able to
locate where you want the floor guide to be
installed according to your decision of sliding.