Instructions

TECHNIK / TECHNICS
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 7
SB163VH
3.3 Technische Daten / Technical Data
Parameter / parameters
Wert / value
Spannung / Voltage
230 V/ 1 /50 Hz
Motorleistung / Motor power S1 (100%)
1,1 kW
Spindel Drehzahl / spindle speed
(I): 180-600 min
-1
(II): 580-2000 min
-1
Max. Bohrleistung (Stahl) / max. drilling capacity (steel)
ø16 mm
Spindelaufnahme / spindle taper
MK3/MT3
Bohrfutter / chuck
1-16 mm
Spindelhub / spindle travel
150 mm
Ausladung / distance spindle to column
430 mm
Säulendurchmesser / column diameter
80 mm
Tischgröße / table size
356 x 356 mm
Bodenplattengröße / base-plate dimension
580 x 420 mm
max. Abstand Spindel zu Tisch / max. distance spindle to table
645 mm
Max. Abstand Spindel zu Bodenplatte / max. distance spindle to
base
1150 mm
Schutzklasse / protection class
I
Schutzart / Protection mode
IP22
Maschinendimension (L x B x H) / machine dimensions (L x W x H)
740 x 470 x 1710 mm
Verpackungsmaße (L x B x H) / packaging dimensions (L x W x H)
1530 x 700 x 280 mm
Schalldruckpegel L
PA
/ Sound pressure level L
PA
73,1 dB(A) k: 3dB(A)
Schallleistungspegel L
WA
/ sound power level L
WA
88,5 dB(A) k: 3dB(A)
Nettogewicht / net Weight
88,5kg
Bruttogewicht / gross-weight
98,5kg
(DE) Hinweis Geräuschangaben: Die angegebenen Werte sind Emissionswerte und müssen damit nicht zugleich auch sichere
Arbeitsplatzwerte darstellen. Obwohl es eine Korrelation zwischen Emissions- und Immissionspegeln gibt, kann daraus nicht zuverlässig
abgeleitet werden, ob zusätzliche Vorsichtsmaßnahmen notwendig sind oder nicht. Faktoren, welche den am Arbeitsplatz tatsächlich
vorhandenen Immissionspegel beeinflussen, beinhalten die Eigenart des Arbeitsraumes und andere Geräuschquellen, d. h. die Zahl der
Maschinen und anderer benachbarter Arbeitsvorgänge. Die zulässigen Arbeitsplatzwerte können ebenso von Land zu Land variieren. Diese
Information soll jedoch den Anwender befähigen, eine bessere Abschätzung von Gefährdung und Risiko vorzunehmen.
(EN) Notice noise emission: The values given are emission values and therefore do not have to represent safe workplace values at the
same time. Although there is a correlation between emission and immission levels, it cannot be reliably deduced whether additional
precautions are necessary or not. Factors influencing the actual immission level at the workplace include the nature of the workspace and
other noise sources, i.e. the number of machines and other adjacent operations. The permissible workplace values may also vary from
country to country. However, this information should enable the user to make a better assessment of hazard and risk.