Safety data sheet





TEST REPORT
NO.: SD02C10011092901-1 Date: 2011-09-29 Page 5 of 9
HANGZHOU SUNDE TESTING CO.,LTD.
16/F,Block A,Cambridge Community,No.789 Shenhua Rd,Hangzhou,China.

TEL:[phone]

 FAX: [phone]

 www.sunde.org.cn
Hygiene measures
Wash hands before breaks and at the end of workday.
Eye/face protection
Safety glasses
Hand protection
full contact:
Glove material: Nitrile rubber
Glove thickness: 0,11 mm
Break through time: > 480 min
splash contact:
Glove material: Nitrile rubber
Glove thickness: 0,11 mm
Break through time: > 480 min
The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related
standard EN374.
This recommendation applies only to the product stated in the safety data sheet<(>,<)> supplied by us and for the
designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in
EN374 please contact the supplier of CE-approved gloves.
Respiratory protection
required when dusts are generated.
Recommended Filter type: Filter P 1 (acc. to DIN 3181) for solid particles of inert substances
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protectivedevices are carried out
according to the instructions of the producer. These measures have to be properly documented.
Section 9 - Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Form: solid
Colour: off-white
Odour: odourless
Odour Threshold: No information available.
pH: neutral
Melting point: 58 °C
Boiling point/boiling range :> 300 °Cat 1.013 hPa