Operation Manual

HOLUX M-1000C Bluetooth GPS Logger Manual

5.2. M-1000C Logger Track Logging and Mode Setting

5.2.1 Data Logging

1. When the power is turned on, the device will automatically search for satellite

positioning (orange LED on), and then logging will begin. When the power is switched

off, the logging will stop. When the power is turned on again, it will once again

conduct satellite positioning and start logging.

5.2.2 GPS Data Logging Mode Setting

1. Install ezTour onto a PC or notebook (see ezTour instructions manual for installation)

2. When the application runs, the following main screen can be seen: