GPS Tracking System Tracker-007 User’s Manual
Table of Contents Introduction........................................................................................................................1 Application .........................................................................................................................1 Parts names and Functions........................................................................................................................... 2 LED Indication ...........................................................
Physical Characteristics .............................................................................................................................. 23 System......................................................................................................................................................... 23 GPRS Protocol ............................................................................................................................................ 23 GSM Antenna ........................
Holux Tracker-007 Introduction Tracker-007 is a multi-functional tracker. Combining with GPRS and high performance GPS, the device can be used to track and report device’s position and status to mobile phone through SMS or Main Data Server (MDS) through HTTP. The operation modes include continuous tracking and position lock (park). SOS buttons can be used to send emergency call. All configurations can be set through SMS or USB interface. The wireless communication includes UDP, TCP/IP, HTTP and SMS.
Holux Tracker-007 Parts names and Functions Park Key GPS Status (Blue LED) SOS, Press two keys together.
Holux Tracker-007 LED Indication Item 1 LED LED icon /color Power Status Indication Blinks every 4 seconds Battery is low Glows steadily Battery is recharging Glows steadily Battery is full Blinks every 4 Device is functioning Green seconds normally Green Blink every 0.5 second Device is powering off when battery is normal Amber Blink every 0.
Holux Tracker-007 Package Contents Thank you for purchasing the Tracker-007 wireless GPS logger. Before you start, make sure that the following items are included in your package. If any of these items are missing, please contact your original local HOLUX dealer or distributor.
Holux Tracker-007 Before You Getting Started Possible Additional Fee • Position request and position response sent by SMS will be charged. • Each zoom operation will be charged also according to data quantity transferred. About GPS • GPS signals are incapable of penetrating solid objects that are non-transparent. The signals will be also be affected by surface cover such as tall buildings, tunnels, elevated expressways, forests etc., or weather conditions such as overcast and rain.
Holux Tracker-007 About SIM PIN Code & GPRS Notice: SIM PIN should be unlocked before being inserted into the device. SIM PIN can be disabled through ordinary mobile phone. • SIM card GPRS function enabled is required for normal operation. • The default PIN code in device is 0000. If SIM lock is enabled and password is incorrect, power on/off device three times will make the SIM card locked permanently. Only PUK code can unlock the SIM in such case.
Holux Tracker-007 Installing SIM Card and Battery Tracker-007 without SIM card, battery and bottom cover Slide the SIM card into SIM socket and lock the SIM socket. Install the included battery into Tracker-007 as the arrow sign shown; see below.
Holux Tracker-007 Restore the bottom cover. The final assembly of Tracker-007. inserting cap for water proof. Make sure that battery is fully charged before using this device.
Holux Tracker-007 ezSpot Service ezSpot Service is a multi-functional Holux tracker system which includes ezSpot in mobile phone and ezSpot server at internet. ezSpot can work with Tracker-005 and Tracker-007 from Holux. The compatibility will be guaranteed for Holux products in the future. There are three position report operation modes in tracker: ezSpot, ezSpot server or both. In ezSpot mode, user can change settings in and request real-time position from Tracker through mobile phone.
Holux Tracker-007 User Utility (TrackerConfig) Note: Power on Tracker-007 before plugging in USB cable and connecting with TrackerConfig. Configurations can be set or read correctly only after system initialization being complete. The Tracker-007 enable users the communication with mobile phone through SMS as default. Through this utility program, Tracker-007 can be configured to communicate with ezSpot server through HTTP.
Holux Tracker-007 A new MODEM device in device manager will appear after installation. Check Comm port number from Modem page.
Holux Tracker-007 Parameter Setting and Retrieval Press “Connect” button. After program connecting to the device, it will show a “Next” message in new Diagnostic page and the button name will be changed to “Close”.
Holux Tracker-007 If SIM card is not detected or is locked, “Ready” will not be shown on message frame. Read Device information Check “Read” button will get all information in device. Change Password and Reset Password Press “Set” button in password group to change password. Execute “Reset Password” button will reset password to default “12345”.
Holux Tracker-007 be used when password is forgotten. Report Phone Number Setting There are 4 phone numbers that can be set. Device will respond position request if caller phone number is in the list.
Holux Tracker-007 Message Type Setting The function can be used to set parameter for report target. Tracker-007 can report position to ezSpot in mobile phone or ezSpot server [ezSpot]: Tracker-007 will send position to ezSpot through SMS. [ezSpot Server]: Tracker-007 will send position to ezSpot server (or MDS) through HTTP. [both]: Tracker-007 will send position to ezSpot through SMS and ezSpot server through HTTP. 1 2 3. APN Setting This item is to get and set MDS server setting.
Holux Tracker-007 1 2. Phone Number Setting [Number]: Number (MSISDN) is the phone number of SIM card in Tracker-007. 1 2 Continuous Tracking [Continuous tracking setting] In continuous tracking mode, Tracker-007 will report position to ezSpot server at the preset interval.
Holux Tracker-007 [Interval (min)]: This is the duration, in seconds, for which continuous tracking needs to be done. If 0 is passed to the continuous tracking. 2 1 SIM PIN SIM PIN can be locked or unlocked through “SIM Card” function. SIM PIN code can also be changed. It is recommended to set SIM PIN in unlock mode to prevent SIM card from entering locked state.
Holux Tracker-007 EPO Setting EPO data can speed up TTFF at weak GPS environment. User can enable or disable this function. Device will update EPO data every three days.
Holux Tracker-007 Basic Operation Turn on Tracker Press the power key for more than 2 seconds to turn on the device. Green LED will flash every 4 seconds during the process. The device will try to attach during power on stage. It will take about 60 seconds to complete. Turn off Tracker Press the power key for 2 seconds to turn off the device. Position Request Press “Find Now” in menu using ezSpot Enter the correct “Password” and “Tracker Tel. No” for tracker. Press “Find Now”.
Holux Tracker-007 Java phone Mobile phone Position Lock (Park) Pressing park key for more than 2 seconds will activate the park mode. Green LED will blink every 2 seconds in park mode. Blue LED blinks every 2 seconds when device is getting a position fix. Tracker will continue to get a position fix every 5 minutes to check if it is within park range. Only when park state is violated will device sent out the message. Tracker will use the first successful position fix as park center.
Holux Tracker-007 Pressing two keys again will restart SOS process and LED’s will flash 6 times again. SOS mode has the highest priority. Power off function is non-functional during SOS mode. Java phone Mobile phone Java phone Mobile phone When ezSpot in mobile phone receives Tracker-007 SOS message, it will display SOS location of Tracker-007 for 10 sec, then the Unlock SOS screen appears. Click Unlock to unlock SOS.
Holux Tracker-007 Terminology EPO Extended Prediction Orbit, predicted ephemeris data specific for MTK chip solution.. MDS Main Data Server, device will send position information to server through HTTP message MTK Mediatek Inc. SMS Short Message Service TTFF Time to First Fix ezSpot ezSpot Service is a multi-functional Holux tracker system which includes ezSpot in mobile phone and ezSpot server at internet.
Holux Tracker-007 Appendix A. Specifications Physical Characteristics 5-pin Mini-USB connector with USB virtual COM port Dimensions: 76 x 42.5 x 20 mm Weight: 69 g Keys: power and park key Operation temperature: -10 °C ~ 55 °C Storage temperature: -20 °C ~ 70 °C Operatiing humidity 5 ~ 90 % Waterproof: IPX6 System Renesas 32-bit RISC CPU Memory: 8 Mbytes NOR and 4 Mbytes SRAM Location log: 24,000 records.
Holux Tracker-007 15 x 15 x 4 mm patch antenna Power Consumption Battery: Li-Ion Battery, 890 mAh Standby time 110 hours. Park mode with position fix at 5 minutes interval: 50 hours; Continuous tracking with position fix at 15 minutes interval: 70 hours.
Holux Tracker-007 FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Holux Tracker-007 - 26 -
HOLUX Technology, Inc. E-Mail: info@holux.com.tw Web: www.holux.
