User's Manual

9/38
mobile phone and ezSpot server at internet. ezSpot can work with Tracker-005 and
Tracker-007 from Holux. The compatibility will be guaranteed for Holux products in the
future. There are three position report operation modes in tracker: ezSpot, ezSpot
server or both. In ezSpot mode, user can change settings in and request real-time
position from Tracker through mobile phone. For ezSpot server mode, tracker will
report position to server through HTTP. For third operation mode, tracker will report
position to both ezSpot and ezSpot server. The operation mode can be set by PC utility
program TrackerConfig through USB connection.
 ezSpot server provides log history for user to view through web browser. Please
access more service from http://ezspot.holux.com/Holux/
. Updated driver and utility
programs can be downloaded from ezSpot server also. Please register with email and
IMEI to get access of the server and its services.
 For more information please refer to “Holux_ezSpot_User_Manual”
7. User Utility (Tracker Config)
Note: Power on Tracker-005 before plugging in USB cable and connecting with
TrackerConfig. Configurations can be set or read correctly only after system initialization
being complete.
The Tracker-005 enable users the communication with mobile phone through SMS as
default. Through this utility program, Tracker-005 can be configured to communicate with
ezSpot server through HTTP. Continuous tracking mode can be enabled to make device
getting position fix and report to server at preset interval. The APN and server domain
name can be set for internet connection. The SIM PIN can be enabled or disabled. SIM PIN
code can be changed by the utility also. The program can run only for Windows OS. No
support for Linux or Mac OS.
7.1. Installing Device Driver
Plug in Tracker-005 12-pin mini-USB cable. Please make sure you have installed the USB
to COM driver. (PL-2303 Driver Installer.exe). A new COM Port device in device manager
will appear after installation.