User's Manual

14/38
7.7. Message Report Target
The function can be used to set parameter for report target. Tracker-005 can report position
to ezSpot in mobile phone or ezSpot server
[ezSpot]: Tracker-005 will send position to ezSpot through SMS.
[ezSpot Server]: Tracker-005 will send position to ezSpot server (or MDS) through HTTP.
[both]: Tracker-005 will send position to ezSpot through SMS and ezSpot server through
HTTP.
There are two type of “Message Report Target” :
(1) Set“Report Target” to “ezSpot”:
On SOS mode: Tracker-005 sends its position back to Phone Number via short message
every 5 minutes.
On RING mode: if the phone number of the caller is one of the preset phone numbers, then
Tracker-005 will send its position back to the caller via short message, otherwise it will not
return any message to the caller.
(2) Set“Report Target” to “ezSpot Server”:
On SOSmode: Tracker-005 sends its position back to ezSpot Server via HTTP every 5
minutes.
On RING mode: if the phone number of the caller is one of the preset phone numbers, then,
Tracker-005 will send its position back to the ezSpot server via HTTP. Otherwise it will not
return any information to the ezSpot server.
(3) Set “Report Target” to “both”:
On SOS mode: Tracker-005 sends its position back to Phone Number via short message